1525678 Phoenix Contact Data & Networking Devices

1525678 Product Details

• Degree of protection
  IP67
• Coding
  A - standard
• Signal type/category
  CANopen®
• Torque
  3 Nm ... 4 Nm (Installation-side)
• Contact material
  CuZn
• Standards/specifications
  M12 connector IEC 61076-2-101
• AWG power supply
  22
• Rated current at 40°C
  4 A (Plug/socket in accordance with IEC 61076-2-101, cable technical data is to be observed)
• Standards/regulations
  M12 connector IEC 61076-2-101
• Insertion/withdrawal cycles
  > 100
• Contact carrier material
  PA 6.6
• Safety note
  WARNING: The connectors may not be plugged in or disconnected under load. Ignoring the warning or improper use may damage persons and/or property.
• Note
  The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences ari
• Insulation resistance
  ≥ 5 GΩ*km (Data cable)
• Degree of pollution
  3
• Thread type
  M16 x 1.5
• Material, knurls
  Nickel-plated brass
• Ambient temperature (operation)
  -40 °C ... 80 °C (cable, fixed installation)
• Number of positions
  5
• Status display
  No
Test voltage
2500 V
Connection method
CAN Bus / DeviceNet
Length of cable
0.5 m
Rated voltage
48 V AC
Rated surge voltage
1.5 kV
Overvoltage category
II
Mounting type
Front mounting M16 x 1.5 With locking nut
Contact surface material
Ni/Au
Sealing material
NBR
Cable type
CANopen®/DeviceNet™, PUR, violet
Conductor cross section
2x 0.25 mm² (Data cable)
Core diameter including insulation
1.95 mm ±0.05 mm (Data cable)
Optical shield covering
80 %
External sheath, color
violet RAL 4001
Conductor material
Tin-plated Cu litz wires
Attenuation
≤ 22.9 dB/km (with 1 MHz)
Wave impedance
120 Ω ±10 % (with 1 MHz)
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 4.1
27140800
ECLASS 6.0
27279200
ETIM 3.0
EC002061
UNSPSC 6.01
31251501
UNSPSC 18.0
39121413
UNSPSC 21.0
39121413
Cable structure
2xAWG24/19+2xAWG22/19
Conductor structure, voltage supply
19x 0.15 mm
Type of pair shielding
Plastic-coated aluminum foil, aluminum side outside
Minimum bending radius, flexible installation
10 x D
Number of bending cycles
5000000
Acceleration
3 m/s²
Material conductor insulation
Foamed PE (Data cable)
Test voltage Core/Core
2000 V (50 Hz, 1 min.)
Other resistance
Low adhesion
Shielded
yes
REACh SVHC
Lead 7439-92-1
ECLASS 5.1
27143400
ETIM 4.0
EC000830
UNSPSC 12.01
31251501
UNSPSC 11
31251501
UL AWM style
21198 (80°C/300 V)
AWG signal line
24
Wire colors
Red-black, blue-white
Overall twist
2 pairs around a drain wire in the center to the core
Shielding
Tinned copper braided shield
Traversing path
4.5 m
Loop resistance
≤ 181.80 Ω/km (Data cable)
Nominal voltage, cable
≤ 300 V (Peak value, not for high-power applications)
Flame resistance
UL 1581, Sec. 1060 (FT-1)
Test voltage Core/Shield
2000 V (50 Hz, 1 min.)
ECLASS 11.0
27440102
ECLASS 5.0
27143400
ECLASS 7.0
27440103
ETIM 6.0
EC002061
UNSPSC 7.0901
31251501
UNSPSC 20.0
39121413
Flammability rating according to UL 94
V0
Cable type (abbreviation)
920
Conductor structure signal line
19x 0.13 mm
Twisted pairs
2 cores to the pair
External cable diameter D
6.7 mm ±0.3 mm
Minimum bending radius, fixed installation
5 x D
Outer sheath, material
PUR
Traversing rate
3 m/s
Cable capacity
nom. 40 nF/km (Data cable)
Halogen-free
in accordance with DIN VDE 0472 part 815
Ambient temperature (storage/transport)
-40 °C ... 80 °C
ECLASS 10.0.1
27440102
ECLASS 4.0
27140800
ECLASS 9.0
27440102
ETIM 2.0
EC001297
UNSPSC 19.0
39121413
UNSPSC 13.2
39121413
Cable weight
90 kg/km
Bending radius
70 mm
Minimum bending radius, drag chain applications
10 x D

Product condition