1210900 Phoenix Contact Electrical Wires & Cables

Product Details

• Insertion force
  < 100 N
• Standards/regulations
  DIN EN 60751
• Note on the connection method
  Crimp connection, cannot be disconnected
• Type
  Locking actuator top
• Charging standard
  CCS type 1
• Height
  151.2 mm
• Conductor length
  2 m (AC cables)
• Ambient temperature (operation)
  -40 °C ... 80 °C
• Number of phases
  1
• Rated voltage for signal contacts
  30 V AC
• Resistor coding
  2.7 kΩ (between PE and CS)
• Insertion/withdrawal cycles
  > 10000
• Required mounting screws
  M6
• Locking type
  Locking in the inserted state with a locking mechanism
• Minimum bending radius
  15 mm
• Possible power supply range at the motor
  9 V ... 16 V
• Recommended adaptation time
  600 ms
• Mechanical emergency release
  available
• Resistance range
  650 Ω ... 1450 Ω
• Design
  Generation 4
Note
A protective cap is supplied as standard for the DC and AC contacts.
Width
108 mm
Max. altitude
4000 m (above sea level)
Maximum charging power
200 kW
Number of power contacts
5 (L1, N, PE, DC+, DC-)
Rated current for signal contacts
2 A
Insulation resistance of neighboring contacts
> 200 MΩ
Restrictions to mounting position
Only 0 to 90 degree frontal inclination possible, see figure
Screws included in the scope of delivery
none
Flammability rating
V0
Cable structure
4 x 0.5 mm²
Single wire, color
black PP/CS
Typical motor current for locking
0.25 A
Maximum voltage for locking detection
12 V
Lock recognition
available
ECLASS 9.0
27144706
Application
For charging with alternating current (AC) and with direct current (DC)
Charging mode
Mode 2, 3, 4
Depth
122.8 mm
Type of charging current
DC, AC 1-phase
Rated current of power contacts
80 A AC
Type of signal transmission
Pulse width modulation with modulated Powerline communication according to ISO/IEC 15118 / DIN SPEC 70121
Temperature measurement
DC contacts: 2x PT1000 (DIN EN 60751)
Withdrawal force
< 100 N
Mounting hole diameter
6.80 mm (ø)
Housing color
black
Material
Plastic
External sheath, color
Green-yellow
Cable weight
7 kg/km
Max. dwell time with reverse current
1 s
Pause time after entry or exit path
3 s
Temperature range
-40 °C ... 130 °C
Bore dimensions
117.6 mm x 90 mm, 117.6 mm x 83 mm
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Degree of protection
IP55 (plugged in; when plugged in and ready to operate, the degree of protection is only ensued if both plug-in components are original products from Phoenix Contact or suitable standard-compliant products)
Rated voltage for power contacts
250 V AC
Number of signal contacts
2 (CP, CS)
Temperature monitoring
AC contacts: PTC chain (DIN˽EN˽60738-1)
Mounting position of the locking actuator
Top center
Design line
Generation 4
Material surface of contacts
Ag
Outer sheath, material
PVC
Number of positions of theconnectors
4
Reverse current of the motor
max. 1.5 A
Cable length
1 m
Tolerance at the sensor with the recommended measured current
±5K
ECLASS 11.0
27144706
Customer variations
On request
Cable resistance
≤ 37.1 Ω/km
External cable diameter
1.6 mm -0.2 mm
Operating voltage
12 V (Typical power supply at the motor)
Service life insertion cycles
> 10000 load cycles
Recommended measured current
≤ 1 mA (Umax= 16 V DC)
Type of sensor
Pt 1000
ECLASS 10.0.1
27144706