Welcome to Quotebeam
Nikki Gonzales
Bryan Obida
Nick Goetz

We are online

Monday - Friday 6AM - 6PM PST

1194398 Phoenix Contact Electrical Wires & Cables

Phoenix Contact 1194398 CHARX connect, Vehicle charging inlet, Locking actuator top, For charging with alternating current (AC) and with direct current (DC), For installation in electric vehicles (EV), CCS type 1, Combined Charging System, IEC 62196-2, IEC 62196-3, 125 A / 1000
Phoenix Contact

Part#:1194398

Manufacturer:Phoenix Contact

Product Lifecycle:Active

Checking verified in-stock parts...

About the product: CHARX connect, Vehicle charging inlet, Locking actuator top, For charging with alternating current (AC) and with direct current (DC), For installation in electric vehicles (EV), CCS type 1, Combined Charging System, IEC 62196-2, IEC 62196-3, 125 A / 1000

About the manufacturer: Phoenix Contact develops and manufactures industrial electrical and electronic technology products that power, protect, connect and automate systems and equipment.

Check out the 1194398 Phoenix Contact price in the box on the right side or send a quick quote.

1194398 Product Details

  • Design
    Generation 4
  • Note on the connection method
    Crimp connection, cannot be disconnected
  • Conductor length
    2 m (AC cables)
  • Type of charging current
    DC, AC 1-phase
  • Number of power contacts
    5 (L1, N, PE, DC+, DC-)
  • Cable structure
    4 x 0.5 mm²
  • Maximum voltage for locking detection
    12 V
  • Reverse current of the motor
    max. 1.5 A
  • Tolerance at the sensor with the recommended measured current
    ±5K
  • ECLASS 9.0
    27144706
  • Type
    Locking actuator top
  • Note
    A protective cap is supplied as standard for the DC and AC contacts.
  • Ambient temperature (storage/transport)
    -40 °C ... 85 °C
  • Number of phases
    1
  • Rated current for signal contacts
    2 A
  • Insulation resistance of neighboring contacts
    > 200 MΩ
  • Temperature monitoring
    AC contacts: PTC chain (DIN˽EN˽60738-1)
  • Mounting hole diameter
    6.80 mm (ø)
  • Restrictions to mounting position
    Only 0 to 90 degree frontal inclination possible, see figure
  • Required mounting screws
    M6
  • Material
    Plastic
  • Cable resistance
    ≤ 37.1 Ω/km
  • Single wire, color
    black PP/CS
  • Typical motor current for locking
    0.25 A
  • Pause time after entry or exit path
    3 s
  • Type of sensor
    Pt 1000
  • ECLASS 10.0.1
    27144706
  • Charging standard
    CCS type 1
  • Ambient temperature (operation)
    -40 °C ... 80 °C
  • Maximum charging power
    125 kW
  • Number of signal contacts
    2 (CP, CS)
  • Temperature measurement
    DC contacts: 2x PT1000 (DIN EN 60751)
  • Insertion force
    < 100 N
  • Housing color
    black
  • Flammability rating
    V0
  • Outer sheath, material
    PVC
  • Cable weight
    7 kg/km
  • Possible power supply range at the motor
    9 V ... 16 V
  • Max. dwell time with reverse current
    1 s
  • Mechanical emergency release
    available
  • Temperature range
    -40 °C ... 130 °C
  • Application
    For charging with alternating current (AC) and with direct current (DC)
  • Charging mode
    Mode 2, 3, 4
  • Width
    108 mm
  • Max. altitude
    4000 m (above sea level)
  • Degree of protection
    IP55 (plugged in; when plugged in and ready to operate, the degree of protection is only ensued if both plug-in components are original products from Phoenix Contact or suitable standard-compliant products)
  • Rated voltage for power contacts
    250 V AC
  • Type of signal transmission
    Pulse width modulation with modulated Powerline communication according to ISO/IEC 15118 / DIN SPEC 70121
  • Resistor coding
    2.7 kΩ (between PE and CS)
  • Insertion/withdrawal cycles
    > 10000
  • Mounting position of the locking actuator
    Top center
  • Design line
    Generation 4
  • Material surface of contacts
    Ag
  • Locking type
    Locking in the inserted state with a locking mechanism
  • Minimum bending radius
    15 mm
  • External sheath, color
    Green-yellow
  • Operating voltage
    12 V (Typical power supply at the motor)
  • Cable length
    1 m
  • Recommended measured current
    ≤ 1 mA (Umax= 16 V DC)
  • ECLASS 11.0
    27144706
  • Standards/regulations
    DIN EN 60751
  • Height
    151.2 mm
  • Depth
    122.8 mm
  • Bore dimensions
    117.6 mm x 90 mm, 117.6 mm x 83 mm
  • Rated current of power contacts
    48 A AC
  • Rated voltage for signal contacts
    30 V AC
  • Withdrawal force
    < 100 N
  • Screws included in the scope of delivery
    none
  • Customer variations
    On request
  • External cable diameter
    1.6 mm -0.2 mm
  • Number of positions of theconnectors
    4
  • Recommended adaptation time
    600 ms
  • Lock recognition
    available
  • Service life insertion cycles
    > 10000 load cycles
  • Resistance range
    650 Ω ... 1450 Ω

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used surplus in original packaging with original factory seal.

Shipping and Delivery Worldwide

calculate cost and time at Checkout


Secure Payment Processing

with money back guarantee


1 year warranty

on all parts


Responsive Customer Support

we're here to help!

Need more details?

Feel free to chat with us or check our FAQ

Relevant products

Do you have questions?

We’re here for you ✨

We are a proud member of:

Association for High Technology Distribution LogoAssociation for Advancing Automation LogoThe International Society of Automation Logo