1154139 Phoenix Contact Terminal Blocks

1154139 Product Details

• Number of connections
  6
• Insulating material
  PA
• Note
  Notes on operation The blocks can be bridged with one another via the conductor shaft. For corresponding plug-in bridges, see accessories
• Potentials
  1
• Flammability rating according to UL 94
  V0
• Degree of pollution
  3
• Maximum load current
  41 A (with 6 mm² conductor cross section)
• Height
  21.7 mm
• Conductor cross section solid max.
  6 mm²
• Min. AWG conductor cross section, flexible
  24
• Conductor cross section flexible, with ferrule with plastic sleeve max.
  4 mm²
• Permissible humidity (storage/transport)
  30 % ... 70 %
• ECLASS 4.0
  27141120
• ECLASS 5.0
  27141120
• ETIM 6.0
  EC000897
• UNSPSC 13.2
  39121410
• UNSPSC 12.01
  39121410
• Nominal cross section
  4 mm²
• Insulating material group
  I
• Nominal current IN
  32 A
Connection method
Push-in connection
Conductor cross section solid min.
0.5 mm²
Conductor cross section flexible min.
0.2 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.5 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 9.0
27141120
ETIM 3.0
EC000897
UNSPSC 19.0
39121410
Rated surge voltage
6 kV
Width
18.5 mm
Stripping length
10 mm ... 12 mm
Conductor cross section flexible max.
4 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Internal cylindrical gage
A4
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 4.1
27141120
ETIM 4.0
EC000897
UNSPSC 11
39121410
UNSPSC 21.0
39121410
Nominal voltage UN
450 V
Connection in acc. with standard
IEC 60998-2-2
Max. AWG conductor cross section, flexible
12
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.75 mm²
ECLASS 5.1
27141120
ECLASS 7.0
27141120
ETIM 2.0
EC000897
UNSPSC 7.0901
39121410
UNSPSC 20.0
39121410
Conductor cross section flexible, with ferrule without plastic sleeve max.
4 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Connection cross sections directly pluggable
0.5 mm² 6 mm² 20 10
ECLASS 11.0
27141120
ECLASS 10.0.1
27141120
ECLASS 6.0
27141100
UNSPSC 6.01
30211811
ETIM 7.0
EC000897
UNSPSC 18.0
39121410
Open side panel
No
Conductor cross section AWG max.
10
Number of levels
1
Overvoltage category
III
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
1 mm²
Maximum total current
63 A
Length
28.6 mm
Conductor cross section AWG min.
24
Color
green-yellow
Maximum power dissipation for nominal condition
1.02 W (the value is based on one connection block and is multiplied according to the pin assignment)

Product condition