1151079 Phoenix Contact Terminal Blocks

1151079 Product Details

• Nominal cross section
  2.5 mm²
• Rated insulation voltage
  500 V
• Back of the hand protection
  guaranteed
• Power frequency withstand voltage setpoint
  1.89 kV
• Bending test turns
  135
• Tight fit on carrier
  NS 35
• Short circuit stability result
  Test passed
• Result of aging test
  Test passed
• Test frequency
  f1 = 5 Hz to f2 = 250 Hz
• Number of shocks per direction
  3
• Relative insulation material temperature index (Elec., UL 746 B)
  130 °C
• Specific optical density of smoke NFPA 130 (ASTM E 662)
  passed
• Width
  5.2 mm
• Connection
  1st and 2nd level
• Conductor cross section flexible max.
  2.5 mm²
• Conductor cross section flexible, with ferrule with plastic sleeve min.
  0.34 mm²
• Operating temperature
  -60 °C ... 105 °C (max. short-term operating temperature 130°C)
• Ambient temperature (actuation)
  -5 °C ... 70 °C
• ECLASS 5.1
  27141100
• ECLASS 7.0
  27141127
ECLASS 9.0
27141127
UNSPSC 19.0
39121410
UNSPSC 20.0
39121410
Flammability rating according to UL 94
V0
Maximum power dissipation
0.4 W (Per component)
Finger protection
guaranteed
Bending test conductor cross section/weight
0.14 mm² / 0.2 kg
Result of temperature-rise test
Test passed
Short-time current
0.48 kA
Proof of thermal characteristics (needle flame) effective duration
30 s
Test spectrum
Service life test category 2, bogie-mounted
Shock form
Half-sine
Shock duration
18 ms
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Height NS 35/7,5
47.5 mm
Stripping length
10 mm
Conductor cross section AWG max.
12
Min. AWG conductor cross section, flexible
26
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
0.5 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 4.0
27141100
ECLASS 10.0.1
27141127
ECLASS 6.0
27141100
ETIM 7.0
EC000903
Rated surge voltage
6 kV
Insulating material group
I
Result of power-frequency withstand voltage test
Test passed
Tensile test result
Test passed
Tractive force setpoint
60 N
Result of thermal test
Test passed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2018-05
Test duration per axis
5 h
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Height
45.8 mm
Connection method
Push-in connection
Conductor cross section solid max.
4 mm²
Max. AWG conductor cross section, flexible
14
Conductor cross section flexible, with ferrule without plastic sleeve max.
2.5 mm²
Connection cross sections directly pluggable
0.34 mm² 4 mm²
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 11.0
27141127
ECLASS 5.0
27141100
UNSPSC 13.2
39121410
UNSPSC 21.0
39121410
Number of connections
4
Color
blue
Component
Resistance 22 kΩ 1 % 350 V
Open side panel
Yes
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Result of flexion and pull-out test
Test passed
Conductor cross section tensile test
4 mm²
Conductor cross section short circuit testing
4 mm²
Ageing test for screwless modular terminal block temperature cycles
192
ASD level
6.12 (m/s2)2/Hz
Test directions
X-, Y- and Z-axis (pos. and neg.)
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
End cover width
2.2 mm
Height NS 35/15
55 mm
Conductor cross section AWG min.
26
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.34 mm²
Internal cylindrical gage
A3
Number of levels
2
Insulating material
PA
Overvoltage category
III
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Result of surge voltage test
Test passed
Bending test rotation speed
10 rpm
Result of tight fit on support
Test passed
Result of voltage-drop test
Test passed
Oscillation, broadband noise test result
Test passed
Acceleration
30g
Static insulating material application in cold
-60 °C
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Length
68 mm
Conductor cross section solid min.
0.34 mm²
Conductor cross section flexible min.
0.14 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
2.5 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 4.1
27141100
ETIM 6.0
EC000903
UNSPSC 18.0
39121410

Product condition