1119248 Phoenix Contact Data & Networking Devices

1119248 Product Details

• Depth
  113 mm
• Air pressure (operation)
  800 hPa ... 1080 hPa (up to 2000 m above sea level)
• Frequency band
  2.4 GHz
• Number
  2
• Number of interfaces
  1
• Supply current
  typ. 170 mA (at 24 V DC)
• Conductor cross section flexible min.
  0.2 mm²
• Degree of pollution
  2
• Contact discharge
  ± 4 kV
• ECLASS 11.0
  19170501
• Note on dimensions
  Installed dimensions without connector
• Ambient temperature (storage/transport)
  -40 °C ... 85 °C
• Air pressure (storage/transport)
  660 hPa ... 1080 hPa (up to 3500 m above sea level)
• Quality of service (QoS)
  Yes
• Interface
  Ethernet (RJ45)
• Number of positions
  3
• Conductor cross section solid max.
  1.5 mm²
• Housing material
  Polycarbonate, PC
• Mechanical tests
  Shock in acc. with EN 60068-2-27/IEC 60068-2-27 30g, 11 ms half-sine shock pulse
• Voltage
  10 V
Permissible humidity (storage/transport)
5 % ... 95 % (non-condensing)
Degree of protection
IP20
Transmission power
max. 19 dBm (EIRP)
Number of wireless interfaces
1 IEEE 802. 11 a/b/g/n
Ambient temperature (operation)
-40 °C ... 60 °C
Type
IEEE 802.11 a/b/g/n 2.4 GHz and 5 GHz to 300 Mbps
Connection method
Push-in spring connection
Transmission length
100 m (per segment)
Cross section range AWG
24 ... 16 (Use copper wires rated 75° C (UL))
Current consumption
max. 600 mA (at 9 V DC)
Conductor cross section solid min.
0.2 mm²
Conductor cross section AWG min.
24
Wireless licenses
USA, Canada
Frequency range
0.15 MHz ... 80 MHz
Test result
Class B
ECLASS 10.0.1
19170501
Permissible humidity (operation)
5 % ... 95 % (non-condensing)
Antenna connection method
RSMA (female)
Width
63 mm
Configuration
Web-based management, automated CLI
Wireless modules that can be connected
60 (In access point mode)
Transmission speed
10/100 Mbps
Connection technology
COMBICON
Supply voltage range
9 V DC ... 32 V DC (PELV/SELV)
Conductor cross section flexible max.
1.5 mm²
Conductor cross section AWG max.
16
Material base plate
Die-cast zinc, nickel-plated
Standards/regulations
EN 61000-4-6
Indirect discharge
± 6 kV
Test field strength
3 V/m
Comments
±2.2 kV
Height
26 mm
Designation
1128752 FMC 1,5/ 3-ST-3,5-RF GY35BD1-3
Wireless standard
IEEE 802.11
Security
802.11i
Assembly instructions
Antennas not included in scope of supply
Note on the connection method
Recommended conductor cross section: 0.75 mm²
Transmission physics
Copper
Supply voltage
24 V DC (SELV)
Stripping length
10 mm
Mounting type
DIN rail mounting
Net weight
230 g
Signal
± 0.5 kV (symmetrical)
ECLASS 9.0
19170201

Product condition