1119246 Phoenix Contact Data & Networking Devices

1119246 Product Details

• Height
  26 mm
• Ambient temperature (operation)
  -40 °C ... 60 °C
• Permissible humidity (storage/transport)
  5 % ... 95 % (non-condensing)
• Antenna connection method
  RSMA (female)
• Wireless modules that can be connected
  60 (In access point mode)
• Number
  2
• Transmission speed
  10/100 Mbps
• Supply voltage
  24 V DC (SELV)
• Conductor cross section solid max.
  1.5 mm²
• Material base plate
  Die-cast zinc, nickel-plated
• Frequency range
  0.15 MHz ... 80 MHz
• Note on dimensions
  Installed dimensions without connector
• Permissible humidity (operation)
  5 % ... 95 % (non-condensing)
• Designation
  1128752 FMC 1,5/ 3-ST-3,5-RF GY35BD1-3
• Quality of service (QoS)
  Yes
• Transmission power
  max. 19 dBm (EIRP)
• Type
  IEEE 802.11 a/b/g/n 2.4 GHz and 5 GHz to 300 Mbps
• Number of interfaces
  1
• Connection method
  Push-in spring connection
• Number of positions
  3
Current consumption
max. 600 mA (at 9 V DC)
Conductor cross section flexible min.
0.2 mm²
Stripping length
10 mm
Degree of pollution
2
Wireless licences
Belgium
Contact discharge
± 4 kV
Comments
±2.2 kV
ECLASS 10.0.1
19170501
Interface
Ethernet (RJ45)
Note on the connection method
Recommended conductor cross section: 0.75 mm²
Transmission length
100 m (per segment)
Supply current
typ. 170 mA (at 24 V DC)
Conductor cross section AWG min.
24
Conductor cross section AWG max.
16
Mounting type
DIN rail mounting
Indirect discharge
± 6 kV
Test result
Class B
ECLASS 9.0
19170201
Width
63 mm
Degree of protection
IP20
Wireless standard
IEEE 802.11
Security
802.11i
Supply voltage range
9 V DC ... 32 V DC (PELV/SELV)
Connection technology
COMBICON
Net weight
230 g
Standards/regulations
EN 61000-4-6
Voltage
10 V
Depth
113 mm
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Air pressure (operation)
800 hPa ... 1080 hPa (up to 2000 m above sea level)
Air pressure (storage/transport)
660 hPa ... 1080 hPa (up to 3500 m above sea level)
Frequency band
2.4 GHz
Number of wireless interfaces
1 IEEE 802. 11 a/b/g/n
Configuration
Web-based management, automated CLI
Assembly instructions
Antennas not included in scope of supply
Transmission physics
Copper
Cross section range AWG
24 ... 16 (Use copper wires rated 75° C (UL))
Conductor cross section solid min.
0.2 mm²
Conductor cross section flexible max.
1.5 mm²
Housing material
Polycarbonate, PC
Mechanical tests
Shock in acc. with EN 60068-2-27/IEC 60068-2-27 30g, 11 ms half-sine shock pulse
Wireless licenses
Europe, additional countries in the e-shop
Test field strength
3 V/m
ECLASS 11.0
19170501
Signal
± 0.5 kV (symmetrical)

Product condition