1109564 Phoenix Contact Relays
Part#:1109564
Manufacturer:Phoenix Contact
Product Lifecycle:Active
Checking verified in-stock parts...
About the product: Plug-in industrial relay in basic design with power contacts, 4 changeover contacts, test button, status LED, mechanical switch position indicator, input voltage: 115 V AC
About the manufacturer: Phoenix Contact develops and manufactures industrial electrical and electronic technology products that power, protect, connect and automate systems and equipment.
Check out the 1109564 Phoenix Contact price in the box on the right side or send a quick quote.
1109564 Product Details
- Type of note Notes on operation
- Ambient temperature (operation) -40 °C ... 70 °C
- Nominal input voltage UN 115 V AC
- Typical release time range 5 ms ... 20 ms
- Coil resistance 4.8 kΩ ±12 %
- Maximum switching voltage 250 V AC/DC
- Test voltage 2.5 kVrms (50 Hz, 1 min., winding/contact)
- Designation Corrosive gas test
- Insulation Basic insulation
- China RoHS Environmentally friendly use period: unlimited = EFUP-e
- Width 22.5 mm
- Ambient temperature (storage/transport) -40 °C ... 70 °C
- Mains frequency 50/60 Hz
- Status display Yellow LED
- Type of switch contact Single contact
- Minimum switching voltage 12 V (10 mA)
- Limiting continuous current 6 A
- Operating mode 100% operating factor
- Service life, electrical see diagram
- Rated surge voltage 5 kV
- Identification ISA-S71.04. G3 Harsh Group
- ECLASS 11.0 27371601
- Depth 35.5 mm
- Maximum altitude ≤ 2000 m
- Degree of protection RT II
- Typical input current at UN 9.2 mA (50 Hz)
- Contact type 4 changeover contacts
- Min. switching current 10 mA (12 V)
- Maximum inrush current 12 A (20 ms, N/O contacts)
- Switching capacity min. 120 mW
- Assembly instructions In rows with zero spacing
- Standards/regulations EN 61810-1
- Rated insulation voltage 250 V AC
- Overvoltage category III
- ECLASS 9.0 27371601
- Note Do not use to separate SELV / PELV circuits from other circuits, because safe isolation is not guaranteed.
- Height 28 mm
- Typical response time 5 ms ... 15 ms
- Coil voltage 115 V AC
- Contact material AgNi
- Interrupting rating (ohmic load) max. 144 W (24 V DC)
- Mechanical service life 2x 107 cycles
- Mounting position any
- Pollution degree 2
- ECLASS 10.0.1 27371601
Product condition
New Factory Sealed
New Factory Sealed - New condition, never used surplus in original packaging with original factory seal.
Shipping and Delivery Worldwide
calculate cost and time at Checkout
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Relevant products
Do you have questions?
We’re here for you ✨