1109556 Phoenix Contact Relays

1109556 Product Details

• Ambient temperature (operation)
  -40 °C ... 70 °C
• Degree of protection
  RT II
• Typical response time
  5 ms ... 15 ms
• Coil resistance
  4.8 kΩ ±12 %
• Interrupting rating (ohmic load) max.
  288 W (24 V DC)
• Service life, electrical
  see diagram
• Assembly instructions
  In rows with zero spacing
• Insulation
  Basic insulation
• Maximum altitude
  ≤ 2000 m
• Typical input current at UN
  9.2 mA
• Type of switch contact
  Single contact
• Minimum switching voltage
  12 V (10 mA)
• Type of note
  Notes on operation
• Height
  28 mm
• Depth
  35.5 mm
• Coil voltage
  115 V AC
• Contact material
  AgNi
• Test voltage
  2.5 kVrms (50 Hz, 1 min., winding/contact)
• Rated insulation voltage
  250 V AC
• Identification
  ISA-S71.04. G3 Harsh Group
Note
Do not use to separate SELV / PELV circuits from other circuits, because safe isolation is not guaranteed.
Ambient temperature (storage/transport)
-40 °C ... 70 °C
Mains frequency
50/60 Hz
Typical release time range
5 ms ... 20 ms
Contact type
2 changeover contacts
Maximum switching voltage
250 V AC/DC
Min. switching current
10 mA (12 V)
Switching capacity min.
120 mW
Mechanical service life
2x 107 cycles
Standards/regulations
EN 61810-1
Overvoltage category
III
ECLASS 9.0
27371601
Width
22.5 mm
Nominal input voltage UN
115 V AC
Status display
Yellow LED
Maximum inrush current
24 A (20 ms, N/O contacts)
Operating mode
100% operating factor
Mounting position
any
Rated surge voltage
5 kV
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
Limiting continuous current
12 A
Designation
Corrosive gas test
Pollution degree
2
ECLASS 11.0
27371601
ECLASS 10.0.1
27371601

Product condition