1108544 Phoenix Contact Data & Networking Devices

1108544 Product Details

• Height
  364 mm
• Protection class
  I (Protective grounding of all conductive housing parts)
• Electromagnetic compatibility
  Conformance with EMC Directive 2014/30/EU
• Protection
  Miniature circuit breaker, 6 A ... 16 A, characteristics B, C, D, K
• 2 conductors with the same cross section, flexible, with TWIN ferrule with plastic sleeve
  0.5 mm² ... 1.5 mm²
• Min. AWG conductor cross section, flexible
  24
• Transmission speed
  10/100/1000 Mbps
• Output current
  300 mA (typical)
• Management
  Web-based management (HTTP/HTTPS)
• Test result
  15g, 11 ms
• REACh SVHC
  Lead 7439-92-1
• Tightening torque
  2 Nm M20
• Ambient temperature (storage/transport)
  -40 °C ... 85 °C
• Permissible humidity (operation)
  10 % ... 95 % (non-condensing)
• Material
  Polycarbonate PC (Housing)
• MTTF
  496 Years (SN 29500 standard, temperature 25°C, operating cycle 21%)
• Conductor cross section, flexible, with ferrule, with plastic sleeve
  0.25 mm² ... 0.75 mm² (Stripping length 8 mm)
• Max. AWG conductor cross section, flexible
  10
• Conductor cross section flexible min.
  0.2 mm²
• Transmission medium
  Copper
Interface
Configuration via web-based management
Interface 2
Ethernet / Fast Ethernet / Gigabit Ethernet
Maximum output power
165 W (>55°C derating)
Load/output load current output
no inductive load
Diagnostic functions
RMON History
Time synchronization
SNTP (Simple Network Time Protocol)
Type of test
Shock in acc. with EN 60068-2-27/IEC 60068-2-27
IP parameterization
DHCP client
Comments
Criterion B
Pollution degree
2
ECLASS 11.0
27142422
No. of ports
1
Width
284 mm
Altitude
2000 m
Noise emission
EN 61000-6-4, Class B, domain of use: residential and small commercial
Connection method
Push-in spring connection
Conductor cross section flexible max.
1.5 mm²
Interface 1
Ethernet / Fast Ethernet / Gigabit Ethernet
Transmission length
100 m (per segment)
Interface 3
Configuration interface
Conductor cross section AWG max.
16
Redundancy
RSTP (Rapid Spanning Tree Protocol)
Designation
Corrosive gas test
Standards/regulations
IEC 62444
Conducted noise emission
EN 61000-6-3 Class B, domain of use: residential and small commercial
Rated insulation voltage
3 kV AC (Input / output, IEC/EN 60950-1)
Ambient temperature (operation)
-40 °C ... 70 °C (>50°C derating)
Noise immunity
EN 61000-6-2
External cable diameter
6 mm ... 12 mm (M20)
Power supply system
TN
Conductor cross section flexible, with ferrule without plastic sleeve
0.25 mm² ... 1.5 mm² (Stripping length 8 mm)
Conductor cross section solid min.
0.2 mm²
Interface 4
Switching output
Filter functions
Port prioritization
Identification
ISA-S71.04-1985 G3 Harsh Group A
Indirect discharge
± 6 kV
ECLASS 9.0
27180590
Depth
121 mm
Degree of protection
IP65
Thread type, cable screw connection
5x M20, 5x M25
Other resistance
UV-resistant in accordance with UL746C Housing
Net weight
4300 g
Conductor cross section solid max.
1.5 mm²
Stripping length
10 mm
Basic functions
Store-and-forward switch, complies with IEEE 802.3
Note on the connection method
Auto negotiation and autocrossing
Conductor cross section AWG min.
24
Output nominal voltage
24 V DC ±10 % (Supply for devices within the Smart Camera Box)
Additional functions
Jumbo frames
Contact discharge
± 6 kV
Frequency range
0.15 MHz ... 80 MHz (80% amplitude modulation with 1 kHz)
Overvoltage category
III (With protective modules plugged in)
ECLASS 10.0.1
27142422
Supply voltage range
100 V AC ... 240 V AC -15 % ... +10 % (Single-phase)

Product condition