1108542 Phoenix Contact Data & Networking Devices

1108542 Product Details

• Depth
  121 mm
• Altitude
  2000 m
• External cable diameter
  6 mm ... 12 mm (M20)
• Height
  364 mm
• Permissible humidity (operation)
  10 % ... 95 % (non-condensing)
• Noise immunity
  EN 61000-6-2
• Thread type, cable screw connection
  5x M20, 5x M25
• Electromagnetic compatibility
  Conformance with EMC Directive 2014/30/EU
• MTTF
  441 Years (SN 29500 standard, temperature 25°C, operating cycle 21%)
• Connection method
  Push-in spring connection
• Ambient temperature (operation)
  -40 °C ... 70 °C (>50°C derating)
• Width
  284 mm
• Ambient temperature (storage/transport)
  -40 °C ... 85 °C
• Degree of protection
  IP65
• Noise emission
  EN 61000-6-4, Class B, domain of use: residential and small commercial
• Supply voltage range
  100 V AC ... 240 V AC -15 % ... +10 % (Single-phase)
• Conductor cross section flexible, with ferrule without plastic sleeve
  0.25 mm² ... 1.5 mm² (Stripping length 8 mm)
• 2 conductors with the same cross section, flexible, with TWIN ferrule with plastic sleeve
  0.5 mm² ... 1.5 mm²
• Conductor cross section flexible min.
  0.2 mm²
• Min. AWG conductor cross section, flexible
  24
Interface 1
Ethernet / Fast Ethernet / Gigabit Ethernet
Transmission speed
10/100/1000 Mbps
Maximum output power
165 W (>55°C derating)
Interface 3
Configuration interface
Load/output load current output
no inductive load
Output current
300 mA (typical)
Filter functions
Port prioritization
Additional functions
Jumbo frames
Identification
ISA-S71.04-1985 G3 Harsh Group A
Standards/regulations
IEC 62444
Frequency range
0.15 MHz ... 80 MHz (80% amplitude modulation with 1 kHz)
Rated insulation voltage
3 kV AC (Input / output, IEC/EN 60950-1)
REACh SVHC
Lead 7439-92-1
ECLASS 9.0
27180590
Other resistance
UV-resistant in accordance with UL746C Housing
Net weight
4300 g
Power supply system
TN
Conductor cross section flexible max.
1.5 mm²
Conductor cross section solid min.
0.2 mm²
Stripping length
10 mm
Interface
Configuration via web-based management
Transmission medium
Copper
Interface 2
Ethernet / Fast Ethernet / Gigabit Ethernet
Conductor cross section AWG max.
16
Conductor cross section AWG min.
24
Diagnostic functions
RMON History
Time synchronization
SNTP (Simple Network Time Protocol)
Designation
Corrosive gas test
Test result
15g, 11 ms
Indirect discharge
± 6 kV
Conducted noise emission
EN 61000-6-3 Class B, domain of use: residential and small commercial
Pollution degree
2
ECLASS 10.0.1
27142422
Protection class
I (Protective grounding of all conductive housing parts)
Tightening torque
2 Nm M20
Material
Polycarbonate PC (Housing)
Protection
Miniature circuit breaker, 6 A ... 16 A, characteristics B, C, D, K
Conductor cross section, flexible, with ferrule, with plastic sleeve
0.25 mm² ... 0.75 mm² (Stripping length 8 mm)
Conductor cross section solid max.
1.5 mm²
Max. AWG conductor cross section, flexible
10
No. of ports
1
Note on the connection method
Auto negotiation and autocrossing
Basic functions
Store-and-forward switch, complies with IEEE 802.3
Transmission length
100 m (per segment)
Interface 4
Switching output
Output nominal voltage
24 V DC ±10 % (Supply for devices within the Smart Camera Box)
Management
Web-based management (HTTP/HTTPS)
Redundancy
RSTP (Rapid Spanning Tree Protocol)
IP parameterization
DHCP client
Type of test
Shock in acc. with EN 60068-2-27/IEC 60068-2-27
Contact discharge
± 6 kV
Comments
Criterion B
Overvoltage category
III (With protective modules plugged in)
ECLASS 11.0
27142422

Product condition