1106959 Phoenix Contact Electrical Wires & Cables

1106959 Product Details

• Type
  DC charging cable
• Mating face color
  black
• Material mating face
  Plastic
• Affixed logo
  “PHOENIX CONTACT” logo
• Width
  75 mm (Vehicle charging connector)
• Ambient temperature (storage/transport)
  -40 °C ... 80 °C
• Rated current of power contacts
  200 A
• Rated voltage for power contacts
  1000 V DC
• Insertion/withdrawal cycles
  > 10000
• Wiring standards/regulations
  prEN 50620 / DIN EN 50620
• Type of conductor
  straight
• Cable weight
  max. 1620 kg/km
• Temperature coefficient (TCR)
  3850 ppm/K
• ECLASS 10.0.1
  27144705
• Application
  For charging electric vehicles (EV) with direct current (DC)
• Normative cable length restrictions
  NOTE: Cable management may be required.
• Depth
  267 mm (Vehicle charging connector)
• Number of signal contacts
  2 (CP, PP)
• Temperature monitoring
  2x Pt 1000
• Withdrawal force
  < 100 N
Label
14.1 mm x 44.8 mm (customer logo on request)
Cable structure
2 x 50 mm² + 1 x 25 mm² + 3 x 2 x 0.75 mm²
Minimum bending radius
281 mm (10 x diameter)
Tolerance at the sensor with the recommended measured current
±1K
Shutdown temperature
90 °C equivalent to a Pt 1000 value of 1346.5 Ω
Standards/regulations
DIN EN 60751
Charging standard
CCS type 2
Stripping length
140 mm ±10 mm
Degree of protection
IP44 (plugged in; when plugged in and ready to operate, the degree of protection is only ensued if both plug-in components are original products from Phoenix Contact or suitable standard-compliant products)
Max. altitude
5000 m (above sea level)
Rated voltage for signal contacts
30 V AC
Note on the connection method
Crimp connection, cannot be disconnected
Housing color
black
Housing material
Plastic
External cable diameter
28.1 mm ±0.5 mm
External sheath, color
black
Temperature range
-50 °C ... 130 °C
China RoHS
Environmentally Friendly Use Period = 10;
Design
D-Line 1.1
Height
139 mm (Vehicle charging connector)
Ambient temperature (operation)
-30 °C ... 50 °C
Maximum charging power
200 kW
Rated current for signal contacts
2 A
Resistor coding
1500 Ω (between PE and PP)
Insertion force
< 100 N
Color handle area
black
Flammability rating
V0
Wiring certifications
VDE-Reg. 8798
Outer sheath, material
TPE-U
Type of sensor
Pt 1000
REACh SVHC
Lead 7439-92-1
ECLASS 9.0
27144705
Charging mode
Mode 4
Conductor length
8 m
Number of power contacts
3 (PE, DC+, DC-)
Type of signal transmission
Pulse width modulation with modulated Powerline communication according to ISO/IEC 15118 / DIN SPEC 70121
Design line
Standard
Material handle area
Plastic
Wiring class
Class 6
Cable resistance
≤ 0.00039 Ω/m (based on a power core, at an ambient temperature of 20°C)
Recommended measured current
1 mA (1 V at 0°C)
Long-term stability (max. R0-Drift)
0.06 % (After 1000 hours at 130°C)
ECLASS 11.0
27144705

Product condition