1106949 Phoenix Contact Electrical Wires & Cables

1106949 Product Details

• Height
  139 mm (Vehicle charging connector)
• Degree of protection
  IP44 (plugged in; when plugged in and ready to operate, the degree of protection is only ensued if both plug-in components are original products from Phoenix Contact or suitable standard-compliant products)
• Rated current of power contacts
  80 A
• Temperature monitoring
  2x Pt 1000
• Insertion/withdrawal cycles
  > 10000
• Mating face color
  black
• Wiring standards/regulations
  prEN 50620 / DIN EN 50620
• Outer sheath, material
  TPE-U
• Minimum bending radius
  212 mm (10 x diameter)
• China RoHS
  Environmentally Friendly Use Period = 10;
• Affixed logo
  “PHOENIX CONTACT” logo
• Normative cable length restrictions
  NOTE: The cable length exceeds the normative specification of 10 m.
• Stripping length
  140 mm ±10 mm
• Ambient temperature (storage/transport)
  -40 °C ... 80 °C
• Number of power contacts
  3 (PE, DC+, DC-)
• Type of signal transmission
  Pulse width modulation with modulated Powerline communication according to ISO/IEC 15118 / DIN SPEC 70121
• Insertion force
  < 100 N
• Color handle area
  black
• Flammability rating
  V0
• Material mating face
  Plastic
Cable weight
max. 820 kg/km
Temperature range
-50 °C ... 130 °C
ECLASS 10.0.1
27144705
ECLASS 9.0
27144705
Type
DC charging cable
Standards/regulations
DIN EN 60751
Width
75 mm (Vehicle charging connector)
Depth
267 mm (Vehicle charging connector)
Rated voltage for power contacts
1000 V DC
Resistor coding
1500 Ω (between PE and PP)
Withdrawal force
< 100 N
Label
14.1 mm x 44.8 mm (customer logo on request)
Type of conductor
straight
Cable resistance
≤ 0.00121 Ω/m (based on a power core, at an ambient temperature of 20°C)
Type of sensor
Pt 1000
Long-term stability (max. R0-Drift)
0.06 % (After 1000 hours at 130°C)
ECLASS 11.0
27144705
Design
D-Line 1.1
Conductor length
10 m
Maximum charging power
80 kW
Number of signal contacts
2 (CP, PP)
Note on the connection method
Crimp connection, cannot be disconnected
Design line
Standard
Housing material
Plastic
Cable structure
3 x 16 mm² + 3 x 2 x 0.75 mm²
External cable diameter
21.2 mm ±0.4 mm
Recommended measured current
1 mA (1 V at 0°C)
Temperature coefficient (TCR)
3850 ppm/K
REACh SVHC
Lead 7439-92-1
Application
For charging electric vehicles (EV) with direct current (DC)
Charging mode
Mode 4
Charging standard
CCS type 2
Ambient temperature (operation)
-30 °C ... 50 °C
Max. altitude
5000 m (above sea level)
Rated current for signal contacts
2 A
Rated voltage for signal contacts
30 V AC
Housing color
black
Material handle area
Plastic
Wiring class
Class 6
External sheath, color
black
Tolerance at the sensor with the recommended measured current
±1K
Shutdown temperature
90 °C equivalent to a Pt 1000 value of 1346.5 Ω

Product condition