1105134 Phoenix Contact Electrical Safety Devices

1105134 Product Details

• Depth
  113.6 mm
• Designation
  Air clearances and creepage distances between the power circuits
• Ambient temperature (storage/transport)
  -20 °C ... 85 °C
• Inrush current
  10 A (at both terminal points 5 and 6, Δt = 1 ms at Us)
• Current consumption
  max. 0.82 A (at terminal point 5/A2 at Us and full load)
• Switching frequency
  max. 1/4 x tCycle [Hz]
• Cable length
  max. 100 m (per output)
• Net weight
  154 g
• Assembly instructions
  Observe derating
• Status display
  1 x LED (green), 2 x LED (orange)
• Stripping length
  7 mm
• Rated surge voltage/insulation
  Basic insulation 4 kV between all current paths and housing
• ECLASS 10.0.1
  27371819
• Width
  22.61 mm
• Max. permissible humidity (storage/transport)
  95 % (non-condensing)
• Power consumption at US
  typ. 0.72 W
• Protective circuit
  Suppressor diode
• Output voltage range
  18.2 V DC ... 27.8 V DC (US - 1 V)
• Maximum inrush current
  1.1 A (Δt = 3 s  at Us)
• Protective circuit/component
  Suppressor diode
Nominal operating mode
100% operating factor
Min. degree of protection of inst. location
IP54
Connection method
Screw connection
Conductor cross section solid
0.2 mm² ... 2.5 mm²
Standards/regulations
EN 50178
Degree of pollution
2
Vibration (operation)
10 Hz ... 150 Hz, 2g
Height
112.58 mm
Max. permissible relative humidity (operation)
95 % (non-condensing)
Rated control circuit supply voltage US
24 V DC -20 % / +20 % (provide external protection, typically 5 A)
Number of outputs
16
Output voltage when switched off
max. 0.1 V
Response time
see user manual
Degree of protection
IP20
Housing material
Polyamide PA non-reinforced
Indication
2 x LED (red)
Conductor cross section flexible
0.2 mm² ... 2.5 mm²
Torque
0.5 Nm ... 0.6 Nm
Overvoltage category
II
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 9.0
27371819
Ambient temperature (operation)
-10 °C ... 55 °C (observe derating)
Maximum altitude
≤ 2000 m (Above sea level)
Filter time
typ. 1 ms (in the event of voltage dips)
Output description
PNP, IEC 61131-2 Typ 0,1
Leakage current
max. 100 µA
Short-circuit protection
Yes (self-limitation at 1.1 A)
Mounting position
vertical or horizontal
Protection class
III (EN 50178)
Operating voltage display
1 x green LED
pluggable
Yes
Screw thread
M3
Shock
10g for Δt = 16 ms (continuous shock, 1000 shocks in each space direction)
Rated control supply current IS
typ. 20 mA (Outputs active, without load)
Description
Supply of outputs MO1 ... MO8 via terminal point 5Supply of outputs MO9 ... MO16 via terminal point 6
Voltage
24 V DC (via 24 V)
Limiting continuous current
100 mA (per channel)
Restart time
min. 5 s (Boot time)
Mounting type
DIN rail mounting
Housing color
yellow
Conductor cross-section AWG
24 ... 12
Rated insulation voltage
250 V AC
ECLASS 11.0
27371819

Product condition