1104986 Phoenix Contact Electrical Safety Devices

1104986 Product Details

• Height
  107.74 mm
• Ambient temperature (storage/transport)
  -20 °C ... 85 °C
• Rated control supply current IS
  typ. 82 mA (without sensor supply)
• Inrush current
  max. 14 A (Δt = 1 ms at Us)
• Note regarding the connection technology
  shielded
• Current input signal
  0 mA ... 25 mA (Measuring range)
• Input resistance current input
  290 Ω 25 %
• Input resistance of voltage input
  185 kΩ 25 %
• Supply voltage
  24 V DC ±3 %
• Short-circuit-proof
  yes
• Net weight
  196 g
• Min. degree of protection of inst. location
  IP54
• Housing material
  Polyamide PA non-reinforced
• Conductor cross section solid
  0.2 mm² ... 2.5 mm²
• Rated insulation voltage
  250 V AC
• China RoHS
  Environmentally friendly use period: unlimited = EFUP-e
• Width
  22.61 mm
• Maximum altitude
  ≤ 2000 m (Above sea level)
• Filter time
  typ. 5 ms (in the event of voltage dips at Us)
• Connection technology
  2-conductor, 3-conductor or 4-conductor (2-conductor sensor signal + 2-conductor sensor supply)
Voltage input signal
0 V ... 12 V (Measuring range)
Temperature coefficients
typ. ± 0.07 %/K
Precision
typ. ± 2 % (as current input, relative to the measuring range final value)
Description
Sensor supply voltage per analog input
Response time
see user manual
Protection class
III (EN 50178)
Status display
4x LED (yellow, red)
Conductor cross-section AWG
24 ... 16
Safety Integrity Level Claim Limit (SIL CL)
3 (2-channel wiring)
Overvoltage category
II
ECLASS 11.0
27371819
Ambient temperature (operation)
-10 °C ... 55 °C (observe derating)
Max. permissible humidity (storage/transport)
95 % (non-condensing)
Power consumption at US
typ. 1.96 W (without sensor supply)
Description of the input
Safety-oriented analog inputs, configurable as current or voltage inputs, galvanically isolated
Max. permissible current
max. 35 mA (as current input)
Resolution (current)
381 nA
Permissible cable length
max. 100 m (per input)
Nominal operating mode
100% operating factor
Mounting position
vertical or horizontal
Degree of protection
IP20
Connection method
Push-in connection
Stop category
0
Standards/regulations
EN 50178
Rated surge voltage/insulation
Basic insulation 4 kV between all current paths and housing
Conformance
CE-compliant
ECLASS 9.0
27371819
Max. permissible relative humidity (operation)
95 % (non-condensing)
Rated control circuit supply voltage US
24 V DC -20 % / +20 % (external fuse, typically 6 A)
Input name
IN S1, IN S2, IN S3, IN S4
Scanning rate
2.5/5/10/16.6/20/50/60/100/200/400/800/1000/2000/4000 Hz
Resolution (voltage)
152 µV
Limit frequency (3 dB)
160 Hz (RC low pass, 1st order, as current input)
Current
max. 30 mA (Sensor current recording per channel)
Cycle time
see user manual
Assembly instructions
Observe derating
Housing color
yellow
pluggable
Yes
Performance level (PL)
e (2-channel wiring)
Degree of pollution
2
Shock
10g for Δt = 16 ms (continuous shock, 1000 shocks in each space direction)
Depth
113.6 mm
Designation
Air clearances and creepage distances between the power circuits
Protective circuit
Overload protection Overload detection at  38 mA
Number of inputs
4
Permissible voltage
max. 24 V (as current input)
A/D converter resolution
16 bit
Frequency
20 Hz (max. recommended sensor signal frequency, as current input)
Restart time
min. 5 s (Boot time)
Mounting type
DIN rail mounting
Operating voltage display
1 x green LED
Conductor cross section flexible
0.2 mm² ... 2.5 mm²
Stripping length
10 mm
Safety Integrity Level (SIL)
2
Vibration (operation)
10 Hz ... 150 Hz, 2g
ECLASS 10.0.1
27371819

Product condition