1104985 Phoenix Contact Electrical Safety Devices

1104985 Product Details

• Depth
  113.6 mm
• Maximum altitude
  ≤ 2000 m (Above sea level)
• Power consumption at US
  typ. 1.96 W (without sensor supply)
• Number of inputs
  4
• Scanning rate
  2.5/5/10/16.6/20/50/60/100/200/400/800/1000/2000/4000 Hz
• Precision
  typ. ± 2 % (as current input, relative to the measuring range final value)
• Frequency
  20 Hz (max. recommended sensor signal frequency, as current input)
• Description
  Sensor supply voltage per analog input
• Cycle time
  see user manual
• Mounting type
  DIN rail mounting
• Operating voltage display
  1 x green LED
• Conductor cross-section AWG
  24 ... 12
• Torque
  0.5 Nm ... 0.6 Nm
• Standards/regulations
  EN 50178
• Degree of pollution
  2
• China RoHS
  Environmentally friendly use period: unlimited = EFUP-e
• Height
  112.58 mm
• Max. permissible relative humidity (operation)
  95 % (non-condensing)
• Rated control circuit supply voltage US
  24 V DC -20 % / +20 % (external fuse, typically 6 A)
• Description of the input
  Safety-oriented analog inputs, configurable as current or voltage inputs, galvanically isolated
Input name
IN S1, IN S2, IN S3, IN S4
Permissible voltage
max. 24 V (as current input)
Max. permissible current
max. 35 mA (as current input)
Permissible cable length
max. 100 m (per input)
Response time
see user manual
Net weight
160 g
Assembly instructions
Observe derating
Protection class
III (EN 50178)
Conductor cross section solid
0.2 mm² ... 2.5 mm²
Screw thread
M3
Overvoltage category
II
Conformance
CE-compliant
ECLASS 10.0.1
27371819
Ambient temperature (operation)
-10 °C ... 55 °C (observe derating)
Rated control supply current IS
typ. 82 mA (without sensor supply)
Protective circuit
Overload protection Overload detection at  38 mA
Current input signal
0 mA ... 25 mA (Measuring range)
Input resistance of voltage input
185 kΩ 25 %
Resolution (current)
381 nA
Supply voltage
24 V DC ±3 %
Short-circuit-proof
yes
Nominal operating mode
100% operating factor
Housing material
Polyamide PA non-reinforced
pluggable
Yes
Conductor cross section flexible
0.2 mm² ... 2.5 mm²
Stop category
0
Width
22.61 mm
Max. permissible humidity (storage/transport)
95 % (non-condensing)
Inrush current
max. 14 A (Δt = 1 ms at Us)
Filter time
typ. 5 ms (in the event of voltage dips at Us)
Note regarding the connection technology
shielded
Input resistance current input
290 Ω 25 %
A/D converter resolution
16 bit
Limit frequency (3 dB)
160 Hz (RC low pass, 1st order, as current input)
Current
max. 30 mA (Sensor current recording per channel)
Degree of protection
IP20
Housing color
yellow
Connection method
Screw connection
Safety Integrity Level (SIL)
2
Rated insulation voltage
250 V AC
Shock
10g for Δt = 16 ms (continuous shock, 1000 shocks in each space direction)
ECLASS 9.0
27371819
Ambient temperature (storage/transport)
-20 °C ... 85 °C
Designation
Air clearances and creepage distances between the power circuits
Connection technology
2-conductor, 3-conductor or 4-conductor (2-conductor sensor signal + 2-conductor sensor supply)
Voltage input signal
0 V ... 12 V (Measuring range)
Resolution (voltage)
152 µV
Temperature coefficients
typ. ± 0.07 %/K
Restart time
min. 5 s (Boot time)
Mounting position
vertical or horizontal
Min. degree of protection of inst. location
IP54
Status display
4x LED (yellow, red)
Stripping length
7 mm
Performance level (PL)
e (2-channel wiring)
Safety Integrity Level Claim Limit (SIL CL)
3 (2-channel wiring)
Rated surge voltage/insulation
Basic insulation 4 kV between all current paths and housing
Vibration (operation)
10 Hz ... 150 Hz, 2g
ECLASS 11.0
27371819

Product condition