1104977 Phoenix Contact Electrical Safety Devices

Product Details

• Ambient temperature (operation)
  -10 °C ... 55 °C (observe derating)
• Width
  22.61 mm
• Max. permissible humidity (storage/transport)
  95 % (non-condensing)
• Rated control supply current IS
  < 0.5 mA (Outputs inactive)
• Power consumption at US
  < 12 mW (Outputs inactive)
• Description
  Output supply, O3, O4
• Input current range "0" signal
  < 1 mA
• Height
  107.74 mm
• Ambient temperature (storage/transport)
  -20 °C ... 85 °C
• Designation
  Air clearances and creepage distances between the power circuits
• Protective circuit
  Suppressor diode
• Input voltage range "0" signal
  0 V DC ... 5 V DC
• Max. permissible overall conductor resistance
  1.2 kΩ (Input and reset circuit at US)
• Ohmic load
  min. 10 Ω (Observe limiting continuous current)
• Test pulses
  < 120 µs (Test pulse width of low test pulses)
• Voltage
  24 V DC (via 24 V)
• Nominal operating mode
  100% operating factor
• Mounting type
  DIN rail mounting
• Min. degree of protection of inst. location
  IP54
• Conductor cross section solid
  0.2 mm² ... 2.5 mm²
Safety Integrity Level (SIL)
2
Degree of pollution
2
Conformance
CE-compliant
Vibration (operation)
10 Hz ... 150 Hz, 2g
Input voltage range "1" signal
11 V DC ... 28.8 V DC
Output description
PNP, IEC 61131-2 Typ 0,1
Nominal output voltage range
18.6 V DC ... 28.2 V DC (US - 0.6 V)
Max. inductive load
max. 2.4 mH
Short-circuit protection
Yes (self-limitation at 1.1 A)
Response time
see user manual
Mounting position
vertical or horizontal
Assembly instructions
Observe derating
pluggable
Yes
Stop category
0
Safety Integrity Level Claim Limit (SIL CL)
3 (2-channel wiring)
Standards/regulations
EN 50178
ECLASS 9.0
27371819
ECLASS 11.0
27371819
Depth
113.6 mm
Maximum altitude
≤ 2000 m (Above sea level)
Current consumption
typ. 10 mA (typically with US)
Inrush current
max. 2.5 A (Δt  1 ms)
Description of the input
IEC 61131-2 type 3
Output name
O1, O2, O3, O4
Nominal output voltage
24 V DC (Supply via A1)
Error detection time at 1-channel structure
< 3.5 s (OFF state)
Discharging circuit
Yes, internal
Maximum inrush current
1.1 A (Δt = 3 s  at Us)
Degree of protection
IP20
Housing color
yellow
Connection method
Push-in connection
Conductor cross section flexible
0.2 mm² ... 2.5 mm²
Performance level (PL)
e (2-channel wiring)
Max. permissible relative humidity (operation)
95 % (non-condensing)
Rated control circuit supply voltage US
24 V DC -20 % / +20 % (provide external protection, typically 5 A)
Filter time
250 ms ±2 ms (Test pulse rate > 500 ms)
Number of inputs
4
Input name
Reset inputs
Cable length
max. 100 m (per output)
Number of outputs
8
Leakage current
max. 100 µA
Output voltage when switched off
max. 0.1 V
Output voltage range
18.2 V DC ... 27.8 V DC (US - 1 V)
Net weight
141 g
Protection class
III (EN 50178)
Housing material
Polyamide PA non-reinforced
Status display
12 x LED (yellow)
Stripping length
10 mm
Conductor cross-section AWG
24 ... 16
Overvoltage category
II
Shock
10g for Δt = 16 ms (continuous shock, 1000 shocks in each space direction)
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
Protective circuit/component
Suppressor diode
Limiting continuous current
100 mA (per channel)
Max. capacitive load
max. 820 nF
Switching frequency
max. 1/4 x tCycle [Hz]
Cycle time
see user manual
Restart time
min. 5 s (Boot time)
Operating voltage display
1 x green LED
Indication
2 x LED (red)
Rated insulation voltage
250 V AC
Rated surge voltage/insulation
Basic insulation 4 kV between 24 V power supply and I/Os to the housing
ECLASS 10.0.1
27371819