1094758 Phoenix Contact Relays
Part#:1094758
Manufacturer:Phoenix Contact
Product Lifecycle:Active
Get a quick Quote!
About the product: 6.2 mm PLC basic terminal block with Push-in connection, without relay or solid-state relay, internal amplifier circuit, and an appropriate auxiliary supply for weak signal sources, 24 V DC nominal input voltage
About the manufacturer: Phoenix Contact is one of the manufacturers that offers Relays that you can order at Quotebeam.com. Phoenix Contact manufactures industrial electrical and electronic technology products that offer power, protection, connectivity, and automation for systems and equipment.
Check out the 1094758 Phoenix Contact price in the box on the right side or send a quick quote.
1094758 Product Details
- Width 6.2 mm
- Ambient temperature (operation) -25 °C ... 60 °C
- Voltage range with reference to US 0.8 ... 1.2
- Nominal input voltage UN 24 V DC
- Input voltage range in reference to UN 0.8 ... 1.2
- Contact type Single contact, 1 N/O contact
- Limiting continuous current 0.75 A
- Min. switching current 10 mA
- Output circuit 2-conductor, floating
- Leakage current < 1 mA
- Stripping length 10 mm
- Designation Corrosive gas test
- Pollution degree 2
- ECLASS 10.0.1 27371603
- China RoHS Environmentally Friendly Use Period = 50 years
- Note If the specified maximum values are exceeded, the gold plating is destroyed. The maximum values of the power contact relay are then valid. This can result in a shorter service life than with a pure power contact.
- Depth 94 mm
- Ambient temperature (storage/transport) -40 °C ... 85 °C
- Rated control circuit supply voltage US 24 V DC
- Rated actuating current IC 1 mA
- Status display Yellow LED
- Maximum switching voltage 253 V AC (Partition plate PLC-ATP must be installed for voltages larger than 250 V (L1, L2, L3) between identical terminal points in adjacent modules. Potential bridging is then carried out with FBST 8-PLC... or ...FBST 500...)
- Maximum inrush current 30 A (10 ms)
- Switching capacity min. 120 mW
- Voltage drop at max. limiting continuous current < 1 V
- Color gray
- Connection method Push-in connection
- Conductor cross section AWG 26 ... 14
- Rated insulation voltage 250 V AC
- Insulation Safe isolation, reinforced insulation
- REACh SVHC Lead 7439-92-1
- Protective circuit RCV circuit
- Operating mode 100% operating factor
- Assembly instructions In rows with zero spacing
- Conductor cross section flexible 0.14 mm² ... 2.5 mm²
- Standards/regulations DIN EN 50178
- Identification ISA-S71.04. G3 Harsh Group
- ECLASS 9.0 27371603
- Connection name Output side
- Type of note Notes on operation
- Height 80 mm
- Maximum altitude ≤ 2000 m
- Degree of protection IP20
- Rated control supply current IS ≥ 8 mA (depends on type)
- Surge voltage protection > 33 V
- Fitting of components OPT-24DC/230AC/1
- Contact material AgSnO
- Minimum switching voltage 24 V AC
- Interrupting rating (ohmic load) max. 140 W (at 24 V DC)
- Max. load value 4.5 A2s
- Mounting position any
- Conductor cross section solid 0.14 mm² ... 2.5 mm²
- Rated surge voltage 6 kV
- Overvoltage category III
- ECLASS 11.0 27371603
Product condition
New Factory Sealed
New Factory Sealed - New condition, never used surplus in original packaging with original factory seal.
1-year warranty
Get a quick Quote!
Request a quote, and we will send you price and availability within minutes.
1094758
Select Qty:
Average response time: 11 minutes
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Relevant products
Do you have questions?
We’re here for you ✨
We are a proud member of:
