1088130 Phoenix Contact Programmable Logic Controllers

1088130 Product Details

• ECLASS 11.0
  27242605
• Utilization restriction
  EMC: class A product, see manufacturer's declaration in the download area
• Depth
  62 mm
• Color
  traffic grey A RAL 7042
• Transmission speed
  See system in which you use the Smart Element.
• Power consumption
  min. 264 mW
• Nominal output voltage
  24 V DC
• Input voltage range "1" signal
  11 V DC ... 30 V DC
• Immunity to ESD
  Noise immunity test in accordance with EN 61000-6-2 Electrostatic discharge (ESD) EN 61000-4-2/IEC 61000-4-2 Criterion B, 6 kV contact discharge, 8 kV air discharge
• Mechanical tests
  Vibration resistance in acc. with EN 60068-2-6/IEC 60068-2-6 5g
• Common mode voltage range signal - ground
  -20 V DC ... 20 V DC
• Ambient temperature (operation)
  -25 °C ... 60 °C
• Air pressure (storage/transport)
  70 kPa ... 106 kPa (up to 3000 m above sea level)
• Net weight
  35 g
• Number
  1
• Supply voltage range
  19.2 V DC ... 30 V DC (including all tolerances, including ripple)
• Protection
  See the system in which the Smart Element is used.
• Encoder signals
  symmetrical encoders, in accordance with EIA-422
• Type of protection
  Short-circuit protection
• Voltage range
  19.2 V DC ... 30 V DC
Nominal input voltage UIN
24 V DC
Immunity to EF
Noise immunity test in accordance with EN 61000-6-2 Electromagnetic fields EN 61000-4-3/IEC 61000-4-3 Criterion A, Field intensity: 10 V/m
Immunity to conducted interference
Noise immunity test in accordance with EN 61000-6-2 Conducted interference EN 61000-4-6/IEC 61000-4-6 Criterion A, Test voltage 10 V
China RoHS
Environmentally Friendly Use Period = 50 years
Width
14.9 mm
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Air pressure (operation)
70 kPa ... 106 kPa (up to 3000 m above sea level)
Mounting type
Smart Element slot
Designation
Symmetrical incremental encoders
Start time until ready to operate
< 500 ms (after switching on the supply voltage (object 003Dhex: WakeUpTime))
Current consumption
min. 11 mA (without connected peripherals)
Number of inputs
2 (DI Ref, DI L)
Number of 5 V encoder supplies
1 (+5 V)
Cable length
< 30 m (Shielded cable)
Signal voltage level
Differential signal (signal – inverted signal), in accordance with EIA-422
Input frequency
max. 1 MHz
Nominal input current at UIN
3 mA
Interference emission
Noise emission test as per EN 61000-6-4 Class A
REACh SVHC
Lead 7439-92-1
Supply voltage
24 V DC (using card edge connectors)
Protective circuit
Transient protection Suppressor diode
Current carrying capacity
max. 500 mA
Immunity to burst
Noise immunity test in accordance with EN 61000-6-2 Fast transients (burst) EN 61000-4-4/IEC 61000-4-4 Criterion B, 2 kV
Protection class
III (IEC 61140, EN 61140, VDE 0140-1)
ECLASS 10.0.1
27242605
Height
62.2 mm
Permissible humidity (storage/transport)
5 % ... 95 % (non-condensing)
Degree of pollution
2 (EN 60664-1)
Connection method
Push-in connection
Description of the input
EN 61131-2, type 3
Encoder types that can be connected
1 (A, /A, B, /B, Z, /Z)
Test section
Communications supply / 24 V supply (I/O) 500 V AC 50 Hz 1 min.
Degree of protection
IP20
Mounting position
See the system in which the Smart Element is used.
Input voltage range "0" signal
-3 V DC ... 5 V DC
Immunity to surge
Noise immunity test in accordance with EN 61000-6-2 Transient overvoltage (surge) EN 61000-4-5/IEC 61000-4-5 Criterion B, shielded I/O cables: ±1 kV asymmetrical
Overvoltage category
II (IEC 60664-1)
ECLASS 9.0
27242605
Caption
Dimensions
Permissible humidity (operation)
5 % ... 95 % (non-condensing)
Additional text
using card edge connectors
Input name
Digital inputs
Number of 24 V encoder supplies
1 (+24 V)
Connection technology
1-conductor

Product condition