1086945 Phoenix Contact Electrical Safety Devices

1086945 Product Details

• Height
  112.2 mm
• Max. permissible humidity (storage/transport)
  75 % (on average, 85% infrequently, non-condensing)
• Input current range "0" signal
  0 mA ... 2 mA
• Protective circuit
  Serial protection against polarity reversal 38.6 V suppressor diode
• Contact material
  AgCuNi, + Au
• Switching capacity according to IEC 60947-5-1
  4 A (24 V (DC13))
• Nominal operating mode
  100% operating factor
• Net weight
  206.52 g
• Connection method
  Screw connection
• Max. permissible relative humidity (operation)
  75 % (on average, 85% infrequently, non-condensing)
• Input voltage range "0" signal
  0 V DC ... 5 V DC
• Number of outputs
  2
• Contact type
  2 confirmation current paths
• Switching voltage
  min. 5 V DC
• Mechanical service life
  10x 106 cycles
• Recovery time
  500 ms
• Mounting type
  DIN rail mounting
• Degree of protection
  IP20
• Conductor cross section solid
  0.2 mm² ... 2.5 mm²
• Conductor cross-section AWG
  24 ... 12
Torque
0.6 Nm
Standards/regulations
EN 61010-1, EN 60947-1, EN 60079-7, EN 60079-15
Environmental simulation test
ISA-S71.04 (G3)
China RoHS
Environmentally Friendly Use Period = 50 years
Utilization restriction
EMC: class A product, see manufacturer's declaration in the download area
Depth
114.5 mm
Maximum altitude
≤ 2000 m (Above sea level)
Power consumption at US
typ. 360 mW (per channel (configurable))
Output description
2 N/C contacts parallel, without delay, safety-related, floating
Limiting continuous current
100 mA
Switching frequency
1 Hz
Relay type
Electromechanical relay with force-guided contacts in accordance with IEC/EN 61810-3
Assembly instructions
See derating curve
Housing material
PBT
Conductor cross section flexible
0.2 mm² ... 2.5 mm²
Performance level (PL)
e
Overvoltage category
III
Conformance
CE-compliant
REACh SVHC
Lead 7439-92-1
Ambient temperature (operation)
-40 °C ... 70 °C (observe derating)
Rated control circuit supply voltage US
24 V DC -20 % / +25 %
Inrush current
min. 1 mA
Output name
Confirmation current paths
Switching capacity
min. 20 mW
Typical pickup time at US
< 70 ms (when controlled via A1 or A3 at US)
Mounting position
vertical or horizontal
Min. degree of protection of inst. location
IP54
Stripping length
7 mm
Safety Integrity Level (SIL)
3 (Reference IEC 61508)
Rated surge voltage/insulation
Safe isolation, reinforced insulation 6.4 kV from (A1/A2, A3/A4, 21/22, 41/42) to (13/14, 33/34) and between (13/14) and (33/34)
Shock
15g
ECLASS 10.0.1
27371819
Width
12.5 mm
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Designation
Air clearances and creepage distances between the power circuits
Rated control supply current IS
typ. 15 mA (per channel (configurable))
Filter time
2 ms (in the event of voltage dips at Us)
Sq. Total current
72 A2 (High-demand, observe derating)
Output fuse
150 mA Fast-blow
Typical release time at US
< 30 ms (when controlled via A1 or A3 at US)
Housing color
yellow
Status display
2 x green LEDs
Screw thread
M3
Category
4
Rated insulation voltage
250 V AC
Degree of pollution
2
ATEX
 II 3 G  Ex ec nC IIC T4 Gc
IECEx
Ex ec nC IIC T4 Gc
ECLASS 9.0
27371819
Stop category
0
Safety Integrity Level Claim Limit (SIL CL)
3
Vibration (operation)
10 Hz ... 150 Hz, 2g
UL, USA/Canada
cULus
ECLASS 11.0
27371819

Product condition