1086510 Phoenix Contact Terminal Blocks

Product Details

• Number of levels
  1
• Insulating material
  PA
• Nominal voltage UN
  1000 V
• Result of the test for mechanical stability of terminal points (5 x conductor connection)
  Test passed
• Result of flexion and pull-out test
  Test passed
• Result of tight fit on support
  Test passed
• Short circuit stability result
  Test passed
• Short-time current
  28.8 kA
• Acceleration
  30g
• Shock form
  Half-sine
• Tightening torque, min
  12 Nm
• Connection in acc. with standard
  IEC 61238-1
• Conductor cross section AWG min.
  3/0
• Conductor cross section flexible, with ferrule with plastic sleeve min.
  35 mm²
• 2 conductors with same cross section, stranded max.
  70 mm²
• ECLASS 4.0
  27141120
• ECLASS 7.0
  27141120
• ECLASS 6.0
  27141100
• UNSPSC 6.01
  30211811
• UNSPSC 11
  39121410
UNSPSC 12.01
39121410
Number of positions
1
Color
yellow
Insulating material group
II
Nominal current IN
415 A
Surge voltage test setpoint
9.8 kV
Tight fit on carrier
NS 35
Result of thermal test
Test passed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2018-05
Shock test result
Test passed
Width
37.5 mm
Relative insulation material temperature index (Elec., UL 746 B)
550 °C
Stripping length
43 mm
Conductor cross section flexible, with ferrule without plastic sleeve max.
120 mm²
Conductor cross section flexible max.
185 mm²
ECLASS 10.0.1
27141120
ECLASS 4.1
27141120
ETIM 2.0
EC000897
ETIM 4.0
EC000897
ETIM 6.0
EC000897
UNSPSC 19.0
39121410
Note
The values for aluminum conductors relate to rigid and multi-stranded conductors in accordance with EN 60228.Application notes on connecting aluminum conductors can be found in the download area.
Nominal cross section
240 mm²
Rated surge voltage
8 kV
Maximum load current
415 A (with 240 mm² conductor cross section)
Power frequency withstand voltage setpoint
2.2 kV
Tensile test result
Test passed
Setpoint
20 N
Result of temperature-rise test
Test passed
Test spectrum
Service life test category 2, bogie-mounted
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Number of shocks per direction
3
Height
70 mm
Connection method
Screw connection
Tightening torque max
45 Nm
2 conductors with same cross section, stranded min.
35 mm²
ECLASS 11.0
27141120
ECLASS 5.1
27141100
ETIM 3.0
EC000897
UNSPSC 7.0901
39121410
UNSPSC 18.0
39121410
UNSPSC 20.0
39121410
Potentials
1
Flammability rating according to UL 94
V0
Degree of pollution
3
Open side panel
No
Bending test rotation speed
10 rpm
Result of voltage-drop test
Test passed
Conductor cross section short circuit testing
250 mm²
Oscillation, broadband noise test result
Test passed
ASD level
6.12 (m/s2)2/Hz
Test directions
X-, Y- and Z-axis (pos. and neg.)
Screw thread
M20
Conductor cross section solid max.
240 mm²
Conductor cross section AWG max.
500
Number of connections
2
Overvoltage category
III
Result of surge voltage test
Test passed
Result of power-frequency withstand voltage test
Test passed
Bending test turns
135
Requirements, voltage drop
U1 ≤ 3.2 mV; U2 ≤ 1.5 x U1
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Proof of thermal characteristics (needle flame) effective duration
10 s
Test duration per axis
5 h
Shock duration
18 ms
Length
130 mm
Conductor cross section solid min.
35 mm²
Conductor cross section flexible min.
35 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
35 mm²
ECLASS 5.0
27141120
ECLASS 9.0
27141120
ETIM 7.0
EC000897
UNSPSC 13.2
39121410
UNSPSC 21.0
39121410
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
Conductor cross section flexible, with ferrule with plastic sleeve max.
120 mm²