1086508 Phoenix Contact Terminal Blocks

Product Details

• Number of connections
  2
• Potentials
  1
• Flammability rating according to UL 94
  V0
• Note
  The values for aluminum conductors relate to rigid and multi-stranded conductors in accordance with EN 60228.Application notes on connecting aluminum conductors can be found in the download area.
• Rated surge voltage
  8 kV
• Nominal current IN
  415 A
• Number of positions
  1
• Color
  black
• Degree of pollution
  3
• Result of surge voltage test
  Test passed
• Tensile test result
  Test passed
• Short circuit stability result
  Test passed
• Result of thermal test
  Test passed
• Test frequency
  f1 = 5 Hz to f2 = 250 Hz
• Test directions
  X-, Y- and Z-axis (pos. and neg.)
• Number of shocks per direction
  3
• Shock duration
  18 ms
• Stripping length
  43 mm
• Conductor cross section solid min.
  35 mm²
• Connection in acc. with standard
  IEC 61238-1
Conductor cross section flexible, with ferrule without plastic sleeve max.
120 mm²
Number of levels
1
Insulating material
PA
Insulating material group
II
Surge voltage test setpoint
9.8 kV
Bending test rotation speed
10 rpm
Result of flexion and pull-out test
Test passed
Tightening torque, min
12 Nm
Conductor cross section solid max.
240 mm²
Overvoltage category
III
Nominal voltage UN
1000 V
Power frequency withstand voltage setpoint
2.2 kV
Result of tight fit on support
Test passed
ASD level
6.12 (m/s2)2/Hz
Acceleration
30g
Relative insulation material temperature index (Elec., UL 746 B)
550 °C
2 conductors with same cross section, stranded min.
35 mm²
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 5.1
27141100
ECLASS 9.0
27141120
UNSPSC 18.0
39121410
UNSPSC 20.0
39121410
Result of power-frequency withstand voltage test
Test passed
Result of temperature-rise test
Test passed
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Proof of thermal characteristics (needle flame) effective duration
10 s
Oscillation, broadband noise test result
Test passed
Shock form
Half-sine
Width
37.5 mm
Connection method
Screw connection
Conductor cross section AWG min.
3/0
Conductor cross section flexible, with ferrule with plastic sleeve max.
120 mm²
Nominal cross section
240 mm²
Setpoint
20 N
Requirements, voltage drop
U1 ≤ 3.2 mV; U2 ≤ 1.5 x U1
Test spectrum
Service life test category 2, bogie-mounted
Height
70 mm
Tightening torque max
45 Nm
Conductor cross section AWG max.
500
Conductor cross section flexible, with ferrule without plastic sleeve min.
35 mm²
ECLASS 4.1
27141120
ETIM 2.0
EC000897
UNSPSC 11
39121410
Open side panel
No
Bending test turns
135
Tight fit on carrier
NS 35
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2018-05
Test duration per axis
5 h
Length
130 mm
Conductor cross section flexible max.
185 mm²
Conductor cross section flexible min.
35 mm²
2 conductors with same cross section, stranded max.
70 mm²
ECLASS 5.0
27141120
ECLASS 6.0
27141100
ETIM 4.0
EC000897
ETIM 7.0
EC000897
UNSPSC 13.2
39121410
Maximum load current
415 A (with 240 mm² conductor cross section)
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Result of voltage-drop test
Test passed
Conductor cross section short circuit testing
250 mm²
Short-time current
28.8 kA
Shock test result
Test passed
Screw thread
M20
Conductor cross section flexible, with ferrule with plastic sleeve min.
35 mm²
ECLASS 10.0.1
27141120
ECLASS 11.0
27141120
ETIM 3.0
EC000897
UNSPSC 6.01
30211811
UNSPSC 12.01
39121410
UNSPSC 19.0
39121410
ECLASS 4.0
27141120
ECLASS 7.0
27141120
ETIM 6.0
EC000897
UNSPSC 7.0901
39121410
UNSPSC 21.0
39121410