1086498 Phoenix Contact Terminal Blocks

1086498 Product Details

• Conductor cross section solid max.
  150 mm²
• Number of positions
  1
• Potentials
  1
• Overvoltage category
  III
• Open side panel
  No
• Result of surge voltage test
  Test passed
• Bending test rotation speed
  10 rpm
• Conductor cross section tensile test
  150 mm²
• Requirement temperature-rise test
  Increase in temperature ≤ 45 K
• Result of thermal test
  Test passed
• Test spectrum
  Service life test category 2, bogie-mounted
• Acceleration
  30g
• Number of shocks per direction
  3
• Length
  105.5 mm
• Stripping length
  30 mm
• Nominal cross section
  150 mm²
• Color
  gray
• Degree of pollution
  3
• Maximum load current
  309 A (with 150 mm² conductor cross section)
• Shock protection test specification
  DIN EN 50274 (VDE 0660-514):2002-11
Surge voltage test setpoint
9.8 kV
Bending test turns
135
Tight fit on carrier
NS 35
Result of voltage-drop test
Test passed
Short circuit stability result
Test passed
Proof of thermal characteristics (needle flame) effective duration
10 s
Test directions
X-, Y- and Z-axis (pos. and neg.)
Height
67 mm
Tightening torque, min
20 Nm
ECLASS 6.0
27141100
ETIM 7.0
EC000897
UNSPSC 13.2
39121410
Number of connections
2
Rated surge voltage
8 kV
Nominal voltage UN
1000 V
Power frequency withstand voltage setpoint
2.2 kV
Tensile test result
Test passed
Setpoint
15 N
Conductor cross section short circuit testing
150 mm²
Test duration per axis
5 h
Relative insulation material temperature index (Elec., UL 746 B)
400 °C
Screw thread
M18
Conductor cross section flexible min.
35 mm²
2 conductors with same cross section, stranded max.
50 mm²
ECLASS 11.0
27141120
ETIM 2.0
EC000897
ETIM 6.0
EC000897
UNSPSC 19.0
39121410
Number of levels
1
Insulating material
PA
Insulating material group
II
Finger protection
guaranteed
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Result of tight fit on support
Test passed
Requirements, voltage drop
U1 ≤ 3.2 mV; U2 ≤ 1.5 x U1
Oscillation, broadband noise test result
Test passed
ASD level
6.12 (m/s2)2/Hz
Shock duration
18 ms
Width
30.5 mm
Connection method
Screw connection
Conductor cross section solid min.
35 mm²
Conductor cross section AWG min.
2
Conductor cross section flexible, with ferrule without plastic sleeve min.
35 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
70 mm²
ECLASS 4.1
27141120
ECLASS 7.0
27141120
UNSPSC 6.01
30211811
UNSPSC 12.01
39121410
UNSPSC 21.0
39121410
Note
The values for aluminum conductors relate to rigid and multi-stranded conductors in accordance with EN 60228.Application notes on connecting aluminum conductors can be found in the download area.
Flammability rating according to UL 94
V0
Nominal current IN
309 A
Back of the hand protection
guaranteed
Result of power-frequency withstand voltage test
Test passed
Result of flexion and pull-out test
Test passed
Bending test conductor cross section/weight
35 mm² / 6.8 kg
Tractive force setpoint
427 N
Result of temperature-rise test
Test passed
Short-time current
18 kA
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2018-05
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Shock form
Half-sine
Shock test result
Test passed
Height NS 35/7,5
67 mm
ECLASS 5.0
27141120
ECLASS 9.0
27141120
ETIM 3.0
EC000897
UNSPSC 7.0901
39121410
UNSPSC 20.0
39121410
Conductor cross section flexible max.
150 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
35 mm²
ECLASS 4.0
27141120
ECLASS 5.1
27141100
ETIM 4.0
EC000897
UNSPSC 11
39121410
UNSPSC 18.0
39121410
Tightening torque max
30 Nm
Conductor cross section AWG max.
300
Conductor cross section flexible, with ferrule without plastic sleeve max.
70 mm²
Height NS 35/15
74.5 mm
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 10.0.1
27141120
Connection in acc. with standard
IEC 61238-1
2 conductors with same cross section, stranded min.
35 mm²

Product condition