1086478 Phoenix Contact Terminal Blocks

Product Details

• Number of connections
  2
• Flammability rating according to UL 94
  V0
• Degree of pollution
  3
• Potentials
  1
• Insulating material
  PA
• Rated surge voltage
  8 kV
• Result of power-frequency withstand voltage test
  Test passed
• Bending test conductor cross section/weight
  16 mm² / 2.9 kg
• Result of flexion and pull-out test
  Test passed
• Result of temperature-rise test
  Test passed
• Conductor cross section short circuit testing
  95 mm²
• Oscillation, broadband noise test result
  Test passed
• ASD level
  6.12 (m/s2)2/Hz
• Shock form
  Half-sine
• Number of positions
  1
• Nominal cross section
  95 mm²
• Nominal current IN
  232 A
• Power frequency withstand voltage setpoint
  2.2 kV
• Result of the test for mechanical stability of terminal points (5 x conductor connection)
  Test passed
• Tensile test result
  Test passed
Requirements, voltage drop
U1 ≤ 3.2 mV; U2 ≤ 1.5 x U1
Short circuit stability result
Test passed
Test spectrum
Service life test category 2, bogie-mounted
Number of levels
1
Overvoltage category
III
Maximum load current
232 A (with 95 mm² conductor cross section)
Surge voltage test setpoint
9.8 kV
Bending test rotation speed
10 rpm
Conductor cross section tensile test
95 mm²
Color
black
Insulating material group
II
UNSPSC 12.01
39121410
Setpoint
15 N
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Shock duration
18 ms
Height
58 mm
Conductor cross section AWG min.
4
Conductor cross section flexible max.
70 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
16 mm²
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
Nominal voltage UN
1000 V
Tight fit on carrier
NS 35
Short-time current
11.4 kA
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Number of shocks per direction
3
Height NS 35/15
65.5 mm
Stripping length
27 mm
Conductor cross section flexible min.
16 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
35 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
35 mm²
ECLASS 5.1
27141100
ETIM 4.0
EC000897
UNSPSC 7.0901
39121410
UNSPSC 19.0
39121410
Note
The values for aluminum conductors relate to rigid and multi-stranded conductors in accordance with EN 60228.Application notes on connecting aluminum conductors can be found in the download area.
Result of tight fit on support
Test passed
Result of thermal test
Test passed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2018-05
Test directions
X-, Y- and Z-axis (pos. and neg.)
Width
25.1 mm
Connection method
Screw connection
Connection in acc. with standard
IEC 61238-1
Conductor cross section solid max.
95 mm²
2 conductors with same cross section, stranded min.
16 mm²
ECLASS 11.0
27141120
ECLASS 6.0
27141100
ETIM 7.0
EC000897
UNSPSC 11
39121410
UNSPSC 20.0
39121410
Open side panel
No
Bending test turns
135
Result of voltage-drop test
Test passed
Acceleration
30g
Test duration per axis
5 h
Length
93.6 mm
Screw thread
M14
Conductor cross section solid min.
16 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
16 mm²
ECLASS 4.0
27141120
ECLASS 7.0
27141120
ETIM 6.0
EC000897
Result of surge voltage test
Test passed
Tractive force setpoint
351 N
Proof of thermal characteristics (needle flame) effective duration
10 s
Relative insulation material temperature index (Elec., UL 746 B)
400 °C
Height NS 35/7,5
58 mm
Tightening torque max
20 Nm
Conductor cross section AWG max.
4/0
2 conductors with same cross section, stranded max.
35 mm²
ECLASS 10.0.1
27141120
ECLASS 4.1
27141120
ETIM 2.0
EC000897
ETIM 3.0
EC000897
UNSPSC 18.0
39121410
UNSPSC 21.0
39121410
ECLASS 5.0
27141120
ECLASS 9.0
27141120
UNSPSC 6.01
30211811
UNSPSC 13.2
39121410