1086475 Phoenix Contact Terminal Blocks

Product Details

• Number of positions
  1
• Color
  gray
• Rated surge voltage
  8 kV
• Nominal voltage UN
  1000 V
• Result of surge voltage test
  Test passed
• Power frequency withstand voltage setpoint
  2.2 kV
• Bending test rotation speed
  10 rpm
• Conductor cross section tensile test
  95 mm²
• Tight fit on carrier
  NS 35
• Short circuit stability result
  Test passed
• Proof of thermal characteristics (needle flame) effective duration
  10 s
• Test spectrum
  Service life test category 2, bogie-mounted
• Test duration per axis
  5 h
• ECLASS 4.1
  27141120
• Relative insulation material temperature index (Elec., UL 746 B)
  400 °C
• Shock duration
  18 ms
• Height
  58 mm
• Stripping length
  27 mm
• Conductor cross section AWG min.
  4
• Conductor cross section flexible, with ferrule without plastic sleeve min.
  16 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
16 mm²
UNSPSC 19.0
39121410
Note
The values for aluminum conductors relate to rigid and multi-stranded conductors in accordance with EN 60228.Application notes on connecting aluminum conductors can be found in the download area.
Number of connections
2
Flammability rating according to UL 94
V0
Degree of pollution
3
Open side panel
No
Back of the hand protection
guaranteed
Finger protection
guaranteed
Result of flexion and pull-out test
Test passed
Result of tight fit on support
Test passed
Result of temperature-rise test
Test passed
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Oscillation, broadband noise test result
Test passed
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Number of shocks per direction
3
Height NS 35/15
65.5 mm
Height NS 35/7,5
58 mm
Conductor cross section solid max.
95 mm²
Connection in acc. with standard
IEC 61238-1
2 conductors with same cross section, stranded max.
35 mm²
2 conductors with same cross section, stranded min.
16 mm²
ECLASS 6.0
27141100
UNSPSC 6.01
30211811
UNSPSC 18.0
39121410
Potentials
1
Nominal cross section
95 mm²
Insulating material group
II
Maximum load current
232 A (with 95 mm² conductor cross section)
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Tensile test result
Test passed
Tractive force setpoint
351 N
Result of voltage-drop test
Test passed
Conductor cross section short circuit testing
95 mm²
Short-time current
11.4 kA
Shock form
Half-sine
Test directions
X-, Y- and Z-axis (pos. and neg.)
Width
25.1 mm
Tightening torque max
20 Nm
Screw thread
M14
Conductor cross section flexible min.
16 mm²
Conductor cross section flexible max.
70 mm²
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
UNSPSC 7.0901
39121410
UNSPSC 21.0
39121410
ECLASS 11.0
27141120
ECLASS 5.0
27141120
ETIM 4.0
EC000897
UNSPSC 12.01
39121410
UNSPSC 13.2
39121410
Number of levels
1
Insulating material
PA
Overvoltage category
III
Nominal current IN
232 A
Result of power-frequency withstand voltage test
Test passed
Surge voltage test setpoint
9.8 kV
Bending test turns
135
Result of thermal test
Test passed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2018-05
ASD level
6.12 (m/s2)2/Hz
Acceleration
30g
Length
93.6 mm
Connection method
Screw connection
Conductor cross section solid min.
16 mm²
Conductor cross section AWG max.
4/0
Conductor cross section flexible, with ferrule without plastic sleeve max.
35 mm²
UNSPSC 20.0
39121410
Setpoint
15 N
ECLASS 5.1
27141100
ECLASS 9.0
27141120
ETIM 6.0
EC000897
Requirements, voltage drop
U1 ≤ 3.2 mV; U2 ≤ 1.5 x U1
ETIM 7.0
EC000897
ECLASS 10.0.1
27141120
ETIM 3.0
EC000897
UNSPSC 11
39121410
Bending test conductor cross section/weight
16 mm² / 2.9 kg
ETIM 2.0
EC000897
Conductor cross section flexible, with ferrule with plastic sleeve max.
35 mm²
ECLASS 4.0
27141120
ECLASS 7.0
27141120