1078960 Phoenix Contact Terminal Blocks

1078960 Product Details

• Number of connections
  2
• Area of application
  Railway industry
• Nominal cross section
  2.5 mm²
• Insulating material
  PA
• Rated surge voltage
  8 kV
• Finger protection
  guaranteed
• Surge voltage test setpoint
  9.8 kV
• Bending test turns
  135
• Result of voltage-drop test
  Test passed
• Short circuit stability result
  Test passed
• Ageing test for screwless modular terminal block temperature cycles
  192
• Test frequency
  f1 = 5 Hz to f2 = 250 Hz
• Shock duration
  18 ms
• Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
  125 °C
• Specific optical density of smoke NFPA 130 (ASTM E 662)
  passed
• Height NS 35/7,5
  36.8 mm
• Stripping length
  8 mm ... 10 mm
• Conductor cross section AWG max.
  12
• Conductor cross section flexible, with ferrule without plastic sleeve max.
  2.5 mm²
• Ambient temperature (storage/transport)
  -25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 4.0
27141121
ECLASS 7.0
27141120
UNSPSC 7.0901
39121410
UNSPSC 18.0
39121410
Potentials
1
Maximum load current
28 A (with 4 mm² conductor cross section, rigid)
Result of surge voltage test
Test passed
Result of flexion and pull-out test
Test passed
Conductor cross section tensile test
4 mm²
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Short-time current
0.3 kA
Result of aging test
Test passed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2018-05
Acceleration
30g
Shock test result
Test passed
Number of shocks per direction
3
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Height
35.3 mm
Height NS 35/15
44.3 mm
Conductor cross section AWG min.
26
Min. AWG conductor cross section, flexible
26
Conductor cross section flexible, with ferrule with plastic sleeve max.
2.5 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
ECLASS 10.0.1
27141120
ECLASS 4.1
27141121
ECLASS 9.0
27141120
ETIM 6.0
EC000897
UNSPSC 6.01
30211811
UNSPSC 19.0
39121410
ETIM 7.0
EC000897
Number of positions
1
Color
gray
Degree of pollution
3
Open side panel
Yes
Nominal voltage UN
800 V
Result of power-frequency withstand voltage test
Test passed
Bending test rotation speed
10 rpm
Result of tight fit on support
Test passed
Result of temperature-rise test
Test passed
Result of thermal test
Test passed
ASD level
6.12 (m/s2)2/Hz
Test duration per axis
5 h
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Width
5.2 mm
Connection
1 level
Connection in acc. with standard
IEC 60947-7-1
Conductor cross section flexible max.
4 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
1.5 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
1 mm²
Connection cross sections directly pluggable
0.5 mm² 4 mm² 20 12
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 5.1
27141100
ETIM 3.0
EC000897
ETIM 2.0
EC000897
UNSPSC 12.01
39121410
UNSPSC 13.2
39121410
Number of levels
1
Flammability rating according to UL 94
V0
Overvoltage category
III
Nominal current IN
24 A (at 2.5 mm²)
Back of the hand protection
guaranteed
Power frequency withstand voltage setpoint
2 kV
Bending test conductor cross section/weight
0.14 mm² / 0.2 kg
Tight fit on carrier
NS 35
Conductor cross section short circuit testing
2.5 mm²
Oscillation, broadband noise test result
Test passed
Test directions
X-, Y- and Z-axis (pos. and neg.)
Static insulating material application in cold
-60 °C
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Length
50.8 mm
Connection method
Push-in connection
Conductor cross section solid min.
0.5 mm²
Conductor cross section flexible min.
0.14 mm²
Internal cylindrical gage
A3
ECLASS 11.0
27141120
ECLASS 6.0
27141100
UNSPSC 20.0
39121410
UNSPSC 21.0
39121410
Insulating material group
I
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Tensile test result
Test passed
Tractive force setpoint
60 N
Requirements, voltage drop
U1 ≤ 3.2 mV; U2 ≤ 1.5 x U1
Proof of thermal characteristics (needle flame) effective duration
30 s
Test spectrum
Service life test category 2, bogie-mounted
Shock form
Half-sine
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
End cover width
2.2 mm
Conductor cross section solid max.
4 mm²
Max. AWG conductor cross section, flexible
12
Conductor cross section flexible, with ferrule without plastic sleeve min.
1.5 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 5.0
27141120
ETIM 4.0
EC000897
UNSPSC 11
39121410

Product condition