1074462 Phoenix Contact Terminal Blocks

1074462 Product Details

• Open side panel
  No
• Result of thermal test
  Test passed
• Test specification, shock test
  following DIN EN 60255-21-1:1996-05
• Width
  41.1 mm
• Height
  34.3 mm
• ETIM 3.0
  EC000886
• ETIM 7.0
  EC000886
• UNSPSC 12.01
  39121410
• UNSPSC 18.0
  39121425
• UNSPSC 21.0
  39121425
• Conductor cross section short circuit testing
  2.5 mm²
• Shock test result
  Test passed
• Conductor cross section solid max.
  2.5 mm²
• ETIM 6.0
  EC000886
• Test specification, oscillation, broadband noise
  following DIN EN 60255-21-1:1996-05
• Test directions
  X-, Y- and Z-axis (pos. and neg.)
• Number of shocks per direction
  3
• Calorimetric heat release NFPA 130 (ASTM E 1354)
  28 MJ/kg
• Fire protection for rail vehicles (DIN EN 45545-2) R22
  HL 1 - HL 3
• Operating temperature
  -60 °C ... 105 °C (max. short-term operating temperature 130°C)
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 11.0
27141133
ECLASS 9.0
27141133
Color
gray
Flammability rating according to UL 94
V0
Maximum load current
15 A
Nominal cross section
2.5 mm²
Insulating material group
I
Short-time current
0.01 kA
Number of levels
1
Rated surge voltage
4 kV
Overvoltage category
III
Nominal voltage UN
320 V
Oscillation, broadband noise test result
Test passed
Number of positions
4
Insulating material
PA
Potentials
4
Short circuit stability result
Test passed
Test frequency
10 - 150 Hz
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Shock duration
11 ms
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Conductor cross section AWG max.
14
Max. AWG conductor cross section, flexible
14
ECLASS 10.0.1
27141133
ECLASS 4.0
27141111
Proof of thermal characteristics (needle flame) effective duration
30 s
Acceleration
30g
Static insulating material application in cold
-60 °C
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Connection in acc. with standard
IEC 61984
Conductor cross section solid min.
0.5 mm²
ECLASS 5.1
27141100
Degree of pollution
3
Shock form
Half-sine
Surface flammability NFPA 130 (ASTM E 162)
passed
Nominal current IN
15 A
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Length
29.1 mm
Min. AWG conductor cross section, flexible
20
Connection method
Spade connection/solder connection
Conductor cross section flexible min.
0.5 mm²
ECLASS 4.1
27141111
UNSPSC 13.2
39121425
Conductor cross section AWG min.
20
Conductor cross section flexible max.
2.5 mm²
ECLASS 6.0
27141100
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 5.0
27141100
ECLASS 7.0
27141133
UNSPSC 11
39121424
Ambient temperature (assembly)
-5 °C ... 70 °C
Ambient temperature (actuation)
-5 °C ... 70 °C
ETIM 4.0
EC000886
UNSPSC 6.01
30211827
UNSPSC 7.0901
39121424
UNSPSC 20.0
39121425
UNSPSC 19.0
39121425

Product condition