1066716 Phoenix Contact AC/DC Power Supplies

1066716 Product Details

• Frequency
  60 Hz
• Switch-on time
  < 1 s
• Insulation voltage input/output
  1.5 kV DC (type test)
• Connection method
  Push-in connection
• Setting range of the output voltage (USet)
  24 V DC ... 28 V DC (> 24 V DC, constant capacity)
• Output current
  2.5 A
• Auxiliary converter stage
  4 kHz ... 70 kHz (Auxiliary converter stage)
• Inflammability class in acc. with UL 94 (housing / terminal blocks)
  V0
• Ambient temperature (start-up type tested)
  -40 °C
• Vibration (operation)
  < 15 Hz, ±2.5 mm amplitude; 15 Hz ... 100 Hz: 2.3 g 90 Min. (in accordance with IEC 60068-2-6)
• Input voltage range
  12 V DC ... 24 V DC -25 % ... +33 %
• Production test A
  3 kV AC
• Conductor cross section AWG
  24 ... 14
• Dynamic Boost (IDyn.Boost)
  2.6 A (≤ 60 °C (4,9 s))
• Voltage
  300 V (1 s)
• Protection class
  II
• Weight
  0.171 kg
• Shock
  18 ms, 30g, in each space direction (according to IEC 60068-2-27)
• Overvoltage category EN 62477-1
  III (≤ 2000 m)
• Standard designation
  Limitation of harmonic line currents
Electromagnetic compatibility
Conformance with EMC Directive 2014/30/EU
Discharge in air
8 kV (Test Level 3)
Electromagnetic HF field
EN 61000-4-3
Frequency range
50 Hz ... 60 Hz
Input
2 kV (symmetrical)
Electric strength, max.
35 V DC (60 s)
Inrush current limitation typical
1.6 A
Type test (IEC/EN 60950-1) A
4 kV AC
Nominal output current (IN)
1.3 A
Feedback voltage resistance
≤ 35 V DC
MTBF (IEC 61709, SN 29500)
> 1347000 h (25 °C)
Main converter stage
70 kHz ... 150 kHz (Main converter stage)
Height
106 mm
Maximum altitude
≤ 5000 m (> 2000 m, observe derating)
Standards/regulations
EN 61000-3-2
Contact discharge
8 kV (Test Level 4)
Test field strength
1000 A/m
Fast transients (burst)
EN 61000-4-4
I/O/S
asymmetrical
Voltage dips
EN 61000-4-11
Asymmetrical conducted disturbance variables
EN 61000-4-16
Test level 2
16.67 Hz 50 Hz 60 Hz (Test Level 4)
Mains buffering
typ. 2 ms (12 V DC)
Typical response time
700 ms (from SLEEP MODE)
Input fuse
15 A (fast blow, internal)
Conductor cross section solid
0.2 mm² ... 2.5 mm²
Nominal output voltage (UN)
24 V DC
Protection against overvoltage at the output (OVP)
< 32 V DC
Time
432000 h
Width
22.5 mm
Depth
90 mm
Ambient temperature (operation)
-25 °C ... 70 °C (> 60 °C Derating: 2.5 %/K)
Max. permissible relative humidity (operation)
≤ 95 % (at 25 °C, non-condensing)
Overvoltage category EN 61010-1
II (≤ 5000 m)
Climatic class
3K3 (in acc. with EN 60721)
Conducted noise emission
EN 55016
Electrostatic discharge
EN 61000-4-2
Noise emission
EN 55016
Signal
2 kV (Test Level 4 - symmetrical)
Power frequency magnetic field
EN 61000-4-8
Conducted interference
EN 61000-4-6
Number of periods
0.5 / 1 / 5 / 50 periods
Attenuated sinusoidal oscillations (ring wave)
EN 61000-4-12
Test level 1
16.67 Hz 50 Hz 60 Hz (Test Level 3)
Criterion C
Temporary adverse effects on the operating behavior, which the device corrects automatically or which can be restored by actuating the operating elements.
Typical current consumption
typ. 3.75 A (12 V DC)
Inrush current integral (I2t)
< 0.1 A2s
Stripping length
10 mm
Conductor cross section flexible
0.2 mm² ... 2.5 mm²
Static Boost (IStat.Boost)
1.625 A (≤ 40 °C)
Temperature
25 °C
Degree of protection
IP20
Efficiency
typ. 90.4 % (12 V DC)
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Degree of pollution
2
EMC requirements for noise immunity
EN 61000-6-1
Designation
SIQ
Identification
CB scheme (IEC 61010-1, IEC 61010-2-201)
Comments
Criterion B
Output
1 kV (Test Level 3 - symmetrical)
Surge voltage load (surge)
EN 61000-4-5
Additional text
Test Level 2
Voltage dip
0 %
Criterion A
Normal operating behavior within the specified limits.
Criterion B
Temporary impairment to operational behavior that is corrected by the device itself.
Pulse-shape magnetic field
EN 61000-4-9
Attenuated oscillating wave
EN 61000-4-18
ECLASS 9.0
27210901

Product condition