1066714 Phoenix Contact AC/DC Power Supplies

Product Details

• Weight0.246 kg
• Typical current consumption
  typ. 7.2 A (12 V DC)
• Inrush current integral (I2t)
  < 0.1 A2s
• Insulation voltage input/output
  1.5 kV DC (type test)
• Connection method
  Push-in connection
• Standard - safety for equipment for measurement, control, and laboratory use
  IEC 61010-1
• Standard – Limitation of mains harmonic currents
  EN 61000-3-2
• Noise emission
  EN 55016
• Discharge in air
  8 kV (Test Level 3)
• Electromagnetic HF field
  EN 61000-4-3
• Comments
  Criterion B
• Surge voltage load (surge)
  EN 61000-4-5
• I/O/S
  asymmetrical
• Frequency
  60 Hz
• Pulse-shape magnetic field
  EN 61000-4-9
• Attenuated sinusoidal oscillations (ring wave)
  EN 61000-4-12
• Attenuated oscillating wave
  EN 61000-4-18
• Criterion B
  Temporary impairment to operational behavior that is corrected by the device itself.
• Mains buffering
  typ. 14 ms (12 V DC)
• Type test (IEC/EN 60950-1) A
  4 kV AC
Conductor cross section solid
0.2 mm² ... 2.5 mm²
Conductor cross section AWG
24 ... 14
Nominal output voltage (UN)
24 V DC
Static Boost (IStat.Boost)
3.125 A (≤ 40 °C)
Input voltage range
12 V DC ... 24 V DC -25 % ... +33 % ()
Inrush current limitation typical
8.6 A
Input fuse
15 A (fast blow, internal)
Production test A
3 kV AC
Stripping length
10 mm
Conductor cross section flexible
0.2 mm² ... 2.5 mm²
Setting range of the output voltage (USet)
24 V DC ... 28 V DC (> 24 V DC, constant capacity)
Nominal output current (IN)
2.5 A
Feedback voltage resistance
≤ 35 V DC
MTBF (IEC 61709, SN 29500)
> 1347000 h (25 °C)
Temperature
25 °C
Voltage
300 V (1 s)
Main converter stage
70 kHz ... 150 kHz (Main converter stage)
Protection class
II
Width
32 mm
Depth
90 mm
Efficiency
typ. 89.5 % (12 V DC)
Ambient temperature (operation)
-25 °C ... 70 °C (> 60 °C Derating: 2.5 %/K)
Max. permissible relative humidity (operation)
≤ 95 % (at 25 °C, non-condensing)
Vibration (operation)
< 15 Hz, ±2.5 mm amplitude; 15 Hz ... 100 Hz: 2.3 g 90 Min. (in accordance with IEC 60068-2-6)
Climatic class
3K3 (in acc. with EN 60721)
EMC requirements for noise immunity
EN 61000-6-1
Standard - Electrical safety
IEC 61010-2-201 (SELV)
Standard - Safe isolation
IEC 61558-2-16
Electromagnetic compatibility
Conformance with EMC Directive 2014/30/EU
Contact discharge
8 kV (Test Level 4)
Frequency range
50 Hz ... 60 Hz
Input
2 kV (symmetrical)
Signal
2 kV (Test Level 4 - symmetrical)
Power frequency magnetic field
EN 61000-4-8
Additional text
Test Level 2
Voltage dips
EN 61000-4-11
Test level 1
16.67 Hz 50 Hz 60 Hz (Test Level 3)
Criterion C
Temporary adverse effects on the operating behavior, which the device corrects automatically or which can be restored by actuating the operating elements.
Dynamic Boost (IDyn.Boost)
5 A (≤ 60 °C (4,9 s))
Protection against overvoltage at the output (OVP)
< 32 V DC
Output current
2.5 A
Time
432000 h
Auxiliary converter stage
4 kHz ... 70 kHz (Auxiliary converter stage)
Degree of protection
IP20
Inflammability class in acc. with UL 94 (housing / terminal blocks)
V0
Height
106 mm
Ambient temperature (start-up type tested)
-40 °C
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Maximum altitude
≤ 5000 m (> 2000 m, observe derating)
Shock
18 ms, 30g, in each space direction (according to IEC 60068-2-27)
Degree of pollution
2
Overvoltage category EN 61010-1
II (≤ 5000 m)
Standard - Safety of transformers
EN 61558-2-16
Standard – Safety extra-low voltage
IEC 61010-1 (SELV)
Conducted noise emission
EN 55016
Electrostatic discharge
EN 61000-4-2
Test field strength
1000 A/m
Fast transients (burst)
EN 61000-4-4
Output
1 kV (Test Level 3 - symmetrical)
Conducted interference
EN 61000-4-6
Voltage dip
0 %
Number of periods
0.5 / 1 / 5 / 50 periods
Asymmetrical conducted disturbance variables
EN 61000-4-16
Test level 2
16.67 Hz 50 Hz 60 Hz (Test Level 4)
Criterion A
Normal operating behavior within the specified limits.
ECLASS 9.0
27210901