1046996 Phoenix Contact Terminal Blocks

Product Details

• Maximum load current
  22 A (with a 2.5 mm² conductor cross section)
• Shock protection test specification
  DIN EN 50274 (VDE 0660-514):2002-11
• Bending test conductor cross section/weight
  0.2 mm² / 0.2 kg
• Result of tight fit on support
  Test passed
• Short circuit stability result
  Test passed
• Open side panel
  No
• Finger protection
  guaranteed
• Tensile test result
  Test passed
• Result of voltage-drop test
  Test passed
• Requirement temperature-rise test
  Increase in temperature ≤ 45 K
• Proof of thermal characteristics (needle flame) effective duration
  30 s
• ASD level
  6.12 (m/s2)2/Hz
• Shock test result
  Test passed
• Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
  125 °C
• Fire protection for rail vehicles (DIN EN 45545-2) R22
  HL 1 - HL 3
• Calorimetric heat release NFPA 130 (ASTM E 1354)
  27,5 MJ/kg
• Height NS 15
  27.4 mm
• Stripping length
  8 mm ... 10 mm
• Number of levels
  1
• Result of surge voltage test
  Test passed
Result of power-frequency withstand voltage test
Test passed
Bending test rotation speed
10 rpm
Tight fit on carrier
NS 35/NS 15
Conductor cross section short circuit testing
2.5 mm²
Result of thermal test
Test passed
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2018-05
Shock duration
18 ms
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2018-05
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Nominal voltage UN
500 V
Back of the hand protection
guaranteed
Power frequency withstand voltage setpoint
1.89 kV
Bending test turns
135
Setpoint
5 N
Result of temperature-rise test
Test passed
Result of aging test
Test passed
Test spectrum
Service life test category 2, bogie-mounted
Test duration per axis
5 h
Shock form
Half-sine
Number of shocks per direction
3
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Connection in acc. with standard
IEC 60947-7-1
Oscillation, broadband noise test result
Test passed
Test directions
X-, Y- and Z-axis (pos. and neg.)
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Length
21.6 mm
Connection
Pick-off level
Conductor cross section flexible min.
0.14 mm²
Nominal cross section
1.5 mm²
Color
black/yellow
Result of flexion and pull-out test
Test passed
Acceleration
30g
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Max. AWG conductor cross section, flexible
14
Conductor cross section flexible, with ferrule with plastic sleeve max.
1.5 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
ECLASS 11.0
27141120
Short-time current
0.3 kA
Insulating material
PA
Insulating material group
I
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Ageing test for screwless modular terminal block temperature cycles
192
Width
31.4 mm
Connection method
Push-in connection
Conductor cross section AWG max.
14
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.14 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 9.0
27141120
Nominal cross section feed-in
4 mm²
Degree of pollution
3
Static insulating material application in cold
-60 °C
Conductor cross section solid max.
2.5 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
1.5 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 10.0.1
27141120
Number of connections
13
Rated surge voltage
6 kV
Maximum total current
32 A
Surface flammability NFPA 130 (ASTM E 162)
passed
Conductor cross section solid min.
0.34 mm²
Min. AWG conductor cross section, flexible
26
Conductor cross section flexible max.
1.5 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.14 mm²
Ambient temperature (actuation)
-5 °C ... 70 °C
ETIM 6.0
EC000897
Flammability rating according to UL 94
V0
Overvoltage category
III
Nominal current IN
17.5 A
Conductor cross section AWG min.
26
Connection cross sections directly pluggable
0.34 mm² 2.5 mm²
Value
0.34 mm²
Internal cylindrical gage
A3
ETIM 7.0
EC000897