1046951 Phoenix Contact Terminal Blocks

Product Details

• Number of connections
  18
• Insulating material
  PA
• Maximum load current
  22 A
• Shock protection test specification
  DIN EN 50274 (VDE 0660-514):2002-11
• Result of the test for mechanical stability of terminal points (5 x conductor connection)
  Test passed
• Tensile test result
  Test passed
• Bending test conductor cross section/weight
  0.14 mm² / 0.2 kg
• Short-time current
  0.3 kA
• Test specification, oscillation, broadband noise
  DIN EN 50155 (VDE 0115-200):2018-05
• Acceleration
  30g
• Test directions
  X-, Y- and Z-axis (pos. and neg.)
• Number of shocks per direction
  3
• Shock duration
  18 ms
• Length
  58.1 mm
• Fire protection for rail vehicles (DIN EN 45545-2) R26
  HL 1 - HL 3
• Conductor cross section AWG max.
  14
• Nominal cross section
  1.5 mm²
• Overvoltage category
  III
• Maximum total current
  26 A
• Power frequency withstand voltage setpoint
  1.89 kV
Result of surge voltage test
Test passed
Result of flexion and pull-out test
Test passed
Setpoint
1 N
Short circuit stability result
Test passed
Oscillation, broadband noise test result
Test passed
Flammability rating according to UL 94
V0
Potentials
1
Maximum power dissipation for nominal condition
0.56 W
Nominal current IN
17.5 A
Back of the hand protection
guaranteed
Bending test turns
135
Result of voltage-drop test
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Result of aging test
Test passed
Test spectrum
Service life test category 2, bogie-mounted
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Width
21.6 mm
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Conductor cross section solid max.
2.5 mm²
Conductor cross section flexible min.
0.14 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Conductor cross section flexible, with ferrule with plastic sleeve max.
1.5 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
UNSPSC 12.01
39121410
UNSPSC 19.0
39121410
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
UNSPSC 21.0
39121410
UNSPSC 13.2
39121410
UNSPSC 18.0
39121410
UNSPSC 20.0
39121410
Rated surge voltage
6 kV
ASD level
6.12 (m/s2)2/Hz
Shock test result
Test passed
Note
Notes on operation The blocks can be bridged with one another via the conductor shaft. For corresponding plug-in bridges, see accessories
Result of power-frequency withstand voltage test
Test passed
Bending test rotation speed
10 rpm
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Result of thermal test
Test passed
Ageing test for screwless modular terminal block temperature cycles
192
Test duration per axis
0.0013888888889 h
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2018-05
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Height NS 15
26.4 mm
Max. AWG conductor cross section, flexible
14
Conductor cross section flexible, with ferrule without plastic sleeve max.
1.5 mm²
Internal cylindrical gage
A1 / B1
ECLASS 11.0
27141120
ECLASS 5.0
27141120
ETIM 6.0
EC000897
UNSPSC 6.01
30211811
Tight fit on carrier
NS 35/NS 15
Shock form
Half-sine
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Connection method
Push-in connection
Min. AWG conductor cross section, flexible
20
Connection cross sections directly pluggable
0.34 mm² 2.5 mm² 26 14
ECLASS 4.1
27141120
ETIM 2.0
EC000897
UNSPSC 11
39121410
Number of levels
1
Insulating material group
I
Nominal voltage UN
500 V
Finger protection
guaranteed
Result of tight fit on support
Test passed
Result of temperature-rise test
Test passed
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Static insulating material application in cold
-60 °C
Stripping length
8 mm ... 10 mm
Conductor cross section AWG min.
26
ECLASS 4.0
27141120
ECLASS 6.0
27141100
ECLASS 9.0
27141120
ETIM 4.0
EC000897
Color
red
Degree of pollution
3
Open side panel
No
Conductor cross section short circuit testing
2.5 mm²
Conductor cross section flexible max.
1.5 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.34 mm²
Ambient temperature (actuation)
-5 °C ... 70 °C
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 7.0
27141120
UNSPSC 7.0901
39121410
Height NS 35/7,5
28.4 mm
Conductor cross section solid min.
0.34 mm²
Connection in acc. with standard
IEC 60947-7-1
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.34 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 10.0.1
27141120
ECLASS 5.1
27141120
ETIM 3.0
EC000897
ETIM 7.0
EC000897