1046612 Phoenix Contact Terminal Blocks

Product Details

• Insulating material
  PA
• Number of levels
  1
• Insulating material group
  I
• Open side panel
  No
• Result of surge voltage test
  Test passed
• Result of flexion and pull-out test
  Test passed
• Tensile test result
  Test passed
• Setpoint
  1 N
• Result of thermal test
  Test passed
• Test spectrum
  Service life test category 2, bogie-mounted
• Number of shocks per direction
  3
• Calorimetric heat release NFPA 130 (ASTM E 1354)
  27,5 MJ/kg
• Fire protection for rail vehicles (DIN EN 45545-2) R26
  HL 1 - HL 3
• Stripping length
  8 mm ... 10 mm
• Conductor cross section flexible min.
  0.14 mm²
• Connection cross sections directly pluggable
  0.34 mm² 2.5 mm² 26 14
• Permissible humidity (storage/transport)
  30 % ... 70 %
• Ambient temperature (assembly)
  -5 °C ... 70 °C
• ECLASS 5.1
  27141120
• ETIM 3.0
  EC000897
UNSPSC 12.01
39121410
Potentials
1
Rated surge voltage
6 kV
Maximum load current
22 A
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Result of power-frequency withstand voltage test
Test passed
Bending test turns
135
Tight fit on carrier
NS 35/NS 15
Result of temperature-rise test
Test passed
Ageing test for screwless modular terminal block temperature cycles
192
ASD level
6.12 (m/s2)2/Hz
Test directions
X-, Y- and Z-axis (pos. and neg.)
Shock form
Half-sine
Static insulating material application in cold
-60 °C
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Connection method
Push-in connection
Connection in acc. with standard
IEC 60998-2-2
Conductor cross section flexible, with ferrule without plastic sleeve max.
1.5 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 5.0
27141120
ECLASS 7.0
27141120
UNSPSC 7.0901
39121410
UNSPSC 19.0
39121410
Number of connections
4
Flammability rating according to UL 94
V0
Maximum power dissipation for nominal condition
0.56 W
Nominal voltage UN
450 V
Surge voltage test setpoint
7.3 kV
Bending test rotation speed
10 rpm
Conductor cross section tensile test
2.5 mm²
Short-time current
0.3 kA
Proof of thermal characteristics (needle flame) effective duration
30 s
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2018-05
Oscillation, broadband noise test result
Test passed
Shock test result
Test passed
Shock duration
18 ms
Surface flammability NFPA 130 (ASTM E 162)
passed
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Width
8.3 mm
Conductor cross section flexible max.
1.5 mm²
Conductor cross section AWG min.
26
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.34 mm²
Internal cylindrical gage
A1 / B1
ECLASS 11.0
27141120
ECLASS 10.0.1
27141120
ETIM 4.0
EC000897
UNSPSC 6.01
30211811
UNSPSC 20.0
39121410
Note
Notes on operation The blocks can be bridged with one another via the conductor shaft. For corresponding plug-in bridges, see accessories
Color
yellow
Degree of pollution
3
Nominal current IN
17.5 A
Finger protection
guaranteed
Power frequency withstand voltage setpoint
1.89 kV
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Tractive force setpoint
50 N
Short circuit stability result
Test passed
Result of aging test
Test passed
Acceleration
30g
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2018-05
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Height
17.7 mm
Conductor cross section solid max.
2.5 mm²
Min. AWG conductor cross section, flexible
24
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.34 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 4.1
27141121
ECLASS 6.0
27141100
ETIM 7.0
EC000897
UNSPSC 18.0
39121410
UNSPSC 21.0
39121410
Nominal cross section
1.5 mm²
Overvoltage category
III
Maximum total current
26 A
Back of the hand protection
guaranteed
Bending test conductor cross section/weight
0.14 mm² / 0.2 kg
Result of tight fit on support
Test passed
Result of voltage-drop test
Test passed
Conductor cross section short circuit testing
2.5 mm²
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Test duration per axis
5 h
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Length
21.6 mm
Conductor cross section solid min.
0.34 mm²
Conductor cross section AWG max.
14
Conductor cross section flexible, with ferrule with plastic sleeve max.
1.5 mm²
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 4.0
27141121
ECLASS 9.0
27141120
UNSPSC 11
39121410
ETIM 6.0
EC000897
UNSPSC 13.2
39121410
Max. AWG conductor cross section, flexible
12