1033182 Phoenix Contact Terminal Blocks

1033182 Product Details

• Number of connections
  2
• Insulating material
  PA
• Maximum load current
  41 A (with 6 mm² conductor cross section)
• Open side panel
  Yes
• Power frequency withstand voltage setpoint
  2.2 kV
• Bending test turns
  135
• Result of temperature-rise test
  Test passed
• Conductor cross section short circuit testing
  6 mm²
• Test specification, oscillation, broadband noise
  DIN EN 50155 (VDE 0115-200):2008-03
• Number of shocks per direction
  3
• Shock test result
  Test passed
• Relative insulation material temperature index (Elec., UL 746 B)
  130 °C
• Fire protection for rail vehicles (DIN EN 45545-2) R23
  HL 1 - HL 3
• Height NS 32
  57 mm
• Number of levels
  1
• Rated surge voltage
  8 kV
• Overvoltage category
  III
• Back of the hand protection
  guaranteed
• Nominal current IN
  41 A
• Surge voltage test setpoint
  9.8 kV
Result of power-frequency withstand voltage test
Test passed
Result of tight fit on support
Test passed
Short circuit stability result
Test passed
Oscillation, broadband noise test result
Test passed
Test duration per axis
5 h
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Shock duration
18 ms
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
End cover width
1.5 mm
Connection
1 level
Nominal cross section
6 mm²
Maximum power dissipation for nominal condition
1.31 W
Finger protection
Not guaranteed
Bending test rotation speed
10 rpm
Bending test conductor cross section/weight
0.14 mm² / 0.2 kg
Requirements, voltage drop
U1 ≤ 3.2 mV; U2 ≤ 1.5 x U1
Short-time current
0.72 kA
Proof of thermal characteristics (needle flame) effective duration
30 s
Acceleration
30g
Shock form
Half-sine
Surface flammability NFPA 130 (ASTM E 162)
passed
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Height NS 35/15
59.5 mm
Note
Connection bolts
Conductor cross section solid min.
0.1 mm²
Conductor cross section AWG max.
12
Cable lug connection according to standard
DIN 46237:1970-07
Hole diameter, min.
4.3 mm
REACh SVHC
Lead 7439-92-1
ECLASS 11.0
27141120
ECLASS 7.0
27141126
ETIM 4.0
EC000902
UNSPSC 11
39121410
UNSPSC 12.01
39121410
Color
gray
Degree of pollution
3
Nominal voltage UN
1000 V (the nominal voltage applies to insulated cable lugs)
Note regarding shock protection
Electric shock protection only with insulated cable lug guaranteed.
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Tensile test result
Test passed
Tight fit on carrier
NS 32/NS 35
Requirement temperature-rise test
Increase in temperature ≤ 45 K
ASD level
6.12 (m/s2)2/Hz
Test directions
X-, Y- and Z-axis (pos. and neg.)
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Width
11 mm
Height NS 35/7,5
52 mm
Connection method
Bolt connection
Tightening torque, min
1.5 Nm
Conductor cross section flexible max.
6 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
6 mm²
Cable lug width, max.
9.6 mm
ECLASS 10.0.1
27141120
ECLASS 4.1
27141126
ECLASS 9.0
27141120
UNSPSC 6.01
30211811
UNSPSC 13.2
39121410
UNSPSC 21.0
39121410
Flammability rating according to UL 94
V0
Shock protection test specification
IEC 60529:2001-02
Result of surge voltage test
Test passed
Result of flexion and pull-out test
Test passed
Setpoint
5 N
Result of voltage-drop test
Test passed
Result of thermal test
Test passed
Test spectrum
Service life test category 2, bogie-mounted
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Static insulating material application in cold
-60 °C
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Length
79.2 mm
Screw thread
M4
Connection in acc. with standard
IEC 60947-7-1
Min. AWG conductor cross section, flexible
26
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.1 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 4.0
27141126
ECLASS 6.0
27141126
ETIM 2.0
EC000902
ETIM 6.0
EC000897
ETIM 7.0
EC000897
UNSPSC 19.0
39121410
Tightening torque max
1.8 Nm
Conductor cross section flexible min.
0.1 mm²
Max. AWG conductor cross section, flexible
10
Min. cross section for cable lug connection
0.5 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 5.0
27141126
UNSPSC 7.0901
39121410
UNSPSC 18.0
39121410
Conductor cross section solid max.
6 mm²
Conductor cross section AWG min.
26
Max. cross section for cable lug connection
2.5 mm²
Bolt diameter
4 mm
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 5.1
27141126
ETIM 3.0
EC000902
UNSPSC 20.0
39121410

Product condition