1030753 Phoenix Contact Terminal Blocks

Product Details

• Nominal cross section
  2.5 mm²
• Flammability rating according to UL 94
  V0
• Nominal current IN
  22 A
• Back of the hand protection
  guaranteed
• Result of the test for mechanical stability of terminal points (5 x conductor connection)
  Test passed
• Bending test turns
  135
• Number of levels
  2
• Insulating material
  PA
• Degree of pollution
  3
• Maximum power dissipation
  0.4 W (max. power dissipation at the resistor, approx. 66 % of the max. power dissipation acc. to the manufacturer´s specification (as per long term operation).)
• Open side panel
  Yes
• Result of flexion and pull-out test
  Test passed
• Tensile test result
  Test passed
• Setpoint
  1 N
• Conductor cross section short circuit testing
  4 mm²
• Ageing test for screwless modular terminal block temperature cycles
  192
• Test specification, oscillation, broadband noise
  DIN EN 50155 (VDE 0115-200):2008-03
• Shock form
  Half-sine
• Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
  125 °C
• Specific optical density of smoke NFPA 130 (ASTM E 662)
  passed
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Connection
1st and 2nd level
Conductor cross section solid min.
0.08 mm²
Max. AWG conductor cross section, flexible
16
Potentials
2
Rated surge voltage
4 kV
Insulating material group
I
Nominal voltage UN
500 V
Power frequency withstand voltage setpoint
1.89 kV
Result of tight fit on support
Test passed
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Oscillation, broadband noise test result
Test passed
Test spectrum
Service life test category 1, class B, body mounted
Test directions
X-, Y- and Z-axis (pos. and neg.)
Static insulating material application in cold
-60 °C
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Height NS 35/7,5
47.5 mm
Connection in acc. with standard
IEC 60947-7-1
Conductor cross section flexible min.
0.08 mm²
Conductor cross section flexible max.
2.5 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
2.5 mm²
Ambient temperature (assembly)
-5 °C ... 70 °C
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 4.0
27141100
ECLASS 6.0
27141100
ETIM 6.0
EC000903
ETIM 7.0
EC000903
UNSPSC 18.0
39121410
UNSPSC 19.0
39121410
Color
gray
Overvoltage category
III
Maximum load current
26 A (with 4 mm² conductor cross section)
Finger protection
guaranteed
Result of surge voltage test
Test passed
Bending test conductor cross section/weight
0.08 mm² / 0.1 kg
Result of temperature-rise test
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Test frequency
f1 = 5 Hz to f2 = 150 Hz
Test duration per axis
5 h
Number of shocks per direction
3
Shock duration
30 ms
Surface flammability NFPA 130 (ASTM E 162)
passed
Width
5.2 mm
Height NS 35/15
55 mm
Stripping length
10 mm
Conductor cross section AWG max.
12
Conductor cross section solid max.
4 mm²
Min. AWG conductor cross section, flexible
28
Internal cylindrical gage
A3
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 10.0.1
27141127
ECLASS 7.0
27141127
ETIM 2.0
EC000903
UNSPSC 12.01
39121410
UNSPSC 13.2
39121410
UNSPSC 21.0
39121410
Number of connections
4
Component
Resistance 10 kΩ 1 %
Maximum power dissipation for nominal condition
0.77 W (the value is multiplied when connecting multiple levels)
Result of power-frequency withstand voltage test
Test passed
Bending test rotation speed
10 rpm
Tight fit on carrier
NS 35
Short circuit stability result
Test passed
Result of aging test
Test passed
ASD level
1.857 (m/s2)2/Hz
Result of voltage-drop test
Test passed
Short-time current
0.48 kA
Result of thermal test
Test passed
Acceleration
5g
Shock test result
Test passed
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
End cover width
2.2 mm
Length
67.5 mm
Connection method
Spring-cage connection
Conductor cross section AWG min.
28
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.14 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
0.5 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 5.0
27141100
ECLASS 5.1
27141100
ETIM 4.0
EC000903
UNSPSC 7.0901
39121410
UNSPSC 11
39121410
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.14 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
2.5 mm²
ECLASS 11.0
27141127
ECLASS 4.1
27141100
ECLASS 9.0
27141127
ETIM 3.0
EC000903
UNSPSC 6.01
30211811
UNSPSC 20.0
39121410