1030131 Phoenix Contact Terminal Blocks

Product Details

• Color
  blue
• Flammability rating according to UL 94
  V0
• Insulating material group
  I
• Potentials
  1
• Overvoltage category
  III
• Nominal voltage UN
  1000 V
• Finger protection
  guaranteed
• Power frequency withstand voltage setpoint
  2.2 kV
• Bending test conductor cross section/weight
  0.5 mm² / 0.3 kg
• Setpoint
  5 N
• Short-time current
  3 kA
• Proof of thermal characteristics (needle flame) effective duration
  30 s
• Test spectrum
  Service life test category 2, bogie-mounted
• Acceleration
  30g
• Shock form
  Half-sine
• Static insulating material application in cold
  -60 °C
• Calorimetric heat release NFPA 130 (ASTM E 1354)
  28 MJ/kg
• Length
  81.9 mm
• Height NS 35/15
  56 mm
• Number of connections
  1
Insulating material
PA
Nominal current IN
70 A (for 16 mm² conductor cross section)
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Tensile test result
Test passed
Result of voltage-drop test
Test passed
Result of thermal test
Test passed
Ageing test for screwless modular terminal block temperature cycles
192
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Test directions
X-, Y- and Z-axis (pos. and neg.)
Shock test result
Test passed
Shock duration
18 ms
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Height
46.8 mm
Conductor cross section solid min.
2.5 mm²
Conductor cross section flexible max.
16 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
2.5 mm²
Connection cross sections directly pluggable
2.5 mm² 25 mm²
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 4.0
27141100
ECLASS 7.0
27141125
UNSPSC 6.01
30211811
UNSPSC 7.0901
39121410
UNSPSC 18.0
39121410
Nominal cross section
16 mm²
Rated surge voltage
6 kV
Maximum load current
76 A
Back of the hand protection
guaranteed
Result of power-frequency withstand voltage test
Test passed
Bending test turns
135
Result of tight fit on support
Test passed
Short circuit stability result
Test passed
Oscillation, broadband noise test result
Test passed
Test duration per axis
5 h
Number of shocks per direction
3
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Height NS 35/7,5
48.5 mm
Conductor cross section solid max.
25 mm²
Conductor cross section AWG max.
4
Conductor cross section flexible, with ferrule without plastic sleeve min.
2.5 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
4 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 10.0.1
27141125
ETIM 3.0
EC001329
UNSPSC 13.2
39121410
Number of levels
1
Degree of pollution
3
Maximum power dissipation for nominal condition
2.43 W
Open side panel
No
Result of flexion and pull-out test
Test passed
Tight fit on carrier
NS 35
Conductor cross section short circuit testing
25 mm²
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Width
12.2 mm
Connection
1 level
Connection in acc. with standard
IEC 60947-7-1
Conductor cross section flexible min.
0.5 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
16 mm²
Internal cylindrical gage
A7
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 5.1
27141100
ETIM 6.0
EC001329
UNSPSC 19.0
39121410
Result of surge voltage test
Test passed
Bending test rotation speed
10 rpm
Result of temperature-rise test
Test passed
Result of aging test
Test passed
ASD level
6.12 (m/s2)2/Hz
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Stripping length
18 mm ... 20 mm
Conductor cross section AWG min.
20
Max. AWG conductor cross section, flexible
4
Conductor cross section flexible, with ferrule with plastic sleeve max.
16 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
ECLASS 4.1
27141100
ECLASS 6.0
27141100
ETIM 4.0
EC000902
UNSPSC 11
39121410
UNSPSC 21.0
39121410
Connection method
Push-in connection
Min. AWG conductor cross section, flexible
24
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
1.5 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 11.0
27141125
ECLASS 5.0
27141100
ECLASS 9.0
27141125
ETIM 7.0
EC001329
UNSPSC 12.01
39121410
UNSPSC 20.0
39121410