1028591 Phoenix Contact Terminal Blocks

Product Details

• UNSPSC 12.01
  39121410
• Number of connections
  2
• Insulating material
  PA
• Maximum load current
  32 A
• Result of the test for mechanical stability of terminal points (5 x conductor connection)
  Test passed
• Result of voltage-drop test
  Test passed
• Short circuit stability result
  Test passed
• Acceleration
  30g
• Number of shocks per direction
  3
• Height
  63.1 mm
• Height NS 32
  69.3 mm
• Stripping length
  10 mm ... 12 mm
• Conductor cross section flexible, with ferrule without plastic sleeve max.
  6 mm²
• Flammability rating according to UL 94
  V0
• Maximum power dissipation for nominal condition
  1.31 W
• Nominal voltage UN
  1000 V
• Result of power-frequency withstand voltage test
  Test passed
• Result of flexion and pull-out test
  Test passed
• Tensile test result
  Test passed
• Test spectrum
  Service life test category 2, bogie-mounted
Test directions
X-, Y- and Z-axis (pos. and neg.)
Shock form
Semi-sinusoidal
Width
10.2 mm
Conductor cross section solid min.
1 mm²
Conductor cross section flexible max.
6 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
1.5 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Internal cylindrical gage
A5
ECLASS 11.0
27141126
ECLASS 4.1
27141121
ECLASS 9.0
27141126
ETIM 6.0
EC000902
ETIM 4.0
EC000902
Potentials
1
Rated surge voltage
8 kV
Nominal current IN
32 A
Back of the hand protection
guaranteed
Bending test turns
135
Result of temperature-rise test
Test passed
Ageing test for screwless modular terminal block temperature cycles
192
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2018-05
Connection
1 level
Connection in acc. with standard
IEC 60947-7-1
Conductor cross section solid max.
10 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
1.5 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
6 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 5.0
27141100
ETIM 2.0
EC000897
ETIM 7.0
EC000902
UNSPSC 11
39121410
UNSPSC 20.0
39121410
Number of levels
1
Color
gray
Degree of pollution
3
Overvoltage category
III
Finger protection
guaranteed
Bending test rotation speed
10 rpm
Tight fit on carrier
NS 32/NS 35
Proof of thermal characteristics (needle flame) effective duration
30 s
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Test duration per axis
5 h
Height NS 35/7,5
64.3 mm
Connection method
Push-in connection
Conductor cross section flexible min.
0.5 mm²
Min. AWG conductor cross section, flexible
20
Max. AWG conductor cross section, flexible
10
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 4.0
27141121
ECLASS 6.0
27141100
UNSPSC 7.0901
39121410
UNSPSC 13.2
39121410
Nominal cross section
6 mm²
Insulating material group
I
Open side panel
Yes
Result of tight fit on support
Test passed
Result of thermal test
Test passed
Oscillation, broadband noise test result
Test passed
ASD level
6.12 (m/s2)2/Hz
Shock duration
18 ms
Length
91 mm
Height NS 35/15
71.8 mm
Conductor cross section AWG min.
20
Conductor cross section AWG max.
8
Connection cross sections directly pluggable
1 mm² 10 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 10.0.1
27141126
ECLASS 5.1
27141100
UNSPSC 6.01
30211811
UNSPSC 19.0
39121410
UNSPSC 21.0
39121410
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
2.5 mm² When using TWIN ferrules, we recommend a minimum ferrule length of 13 mm.
Permissible humidity (storage/transport)
30 % ... 70 %
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 7.0
27141126
ETIM 3.0
EC000897
UNSPSC 18.0
39121410