1028360 Phoenix Contact Terminal Blocks

Product Details

• Number of connections
  2
• Degree of pollution
  3
• Nominal voltage UN
  450 V
• Result of flexion and pull-out test
  Test passed
• Nominal cross section
  4 mm²
• Rated surge voltage
  6 kV
• Maximum load current
  41 A
• Result of surge voltage test
  Test passed
• Result of the test for mechanical stability of terminal points (5 x conductor connection)
  Test passed
• Bending test rotation speed
  10 rpm
• Note
  When aligning several blocks, the foot elements should be placed in a way that maximum 2 blocks are free-hanging in between. Flange elements should be placed after every 6 blocks.
• Short-time current
  0.72 kA
• Stripping length
  10 mm ... 12 mm
• Conductor cross section AWG max.
  10
• Conductor cross section flexible max.
  4 mm²
• Permissible humidity (storage/transport)
  30 % ... 70 %
• Ambient temperature (actuation)
  -5 °C ... 70 °C
• ECLASS 4.1
  27141121
• ETIM 4.0
  EC000897
• UNSPSC 12.01
  39121410
UNSPSC 20.0
39121410
Potentials
1
Insulating material
PA
Insulating material group
I
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Back of the hand protection
guaranteed
Power frequency withstand voltage setpoint
2 kV
Tensile test result
Test passed
Conductor cross section tensile test
6 mm²
Result of voltage-drop test
Test passed
Result of thermal test
Test passed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
ASD level
6.12 (m/s2)2/Hz
Test directions
X-, Y- and Z-axis (pos. and neg.)
Shock duration
18 ms
Width
6.2 mm
Connection method
Push-in connection
Min. AWG conductor cross section, flexible
24
Conductor cross section flexible, with ferrule without plastic sleeve max.
4 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
4 mm²
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 5.1
27141120
ETIM 3.0
EC000897
UNSPSC 7.0901
39121410
UNSPSC 19.0
39121410
Flammability rating according to UL 94
V0
Nominal current IN
32 A
Result of power-frequency withstand voltage test
Test passed
Bending test conductor cross section/weight
0.2 mm² / 0.2 kg
Tractive force setpoint
80 N
Tight fit on carrier
NS 35
Short circuit stability result
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Surface flammability NFPA 130 (ASTM E 162)
passed
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Length
28.6 mm
Conductor cross section flexible min.
0.2 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.5 mm²
Internal cylindrical gage
A4
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 4.0
27141121
ECLASS 5.0
27141120
UNSPSC 6.01
30211811
UNSPSC 18.0
39121410
Number of levels
1
Color
gray
Overvoltage category
III
Open side panel
No
Finger protection
guaranteed
Bending test turns
135
Setpoint
5 N
Requirements, voltage drop
U1 ≤ 3.2 mV; U2 ≤ 1.5 x U1
Test spectrum
Service life test category 2, bogie-mounted
Test duration per axis
5 h
Shock form
Half-sine
Static insulating material application in cold
-60 °C
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Conductor cross section AWG min.
24
Conductor cross section solid min.
0.5 mm²
Max. AWG conductor cross section, flexible
10
Connection cross sections directly pluggable
0.5 mm² 6 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 11.0
27141120
ECLASS 7.0
27141120
ETIM 7.0
EC000897
UNSPSC 13.2
39121410
UNSPSC 21.0
39121410
Result of tight fit on support
Test passed
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Conductor cross section short circuit testing
6 mm²
Ageing test for screwless modular terminal block temperature cycles
192
Oscillation, broadband noise test result
Test passed
Shock test result
Test passed
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Height
21.7 mm
Conductor cross section solid max.
6 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.75 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
ECLASS 10.0.1
27141120
ECLASS 6.0
27141100
ECLASS 9.0
27141120
ETIM 6.0
EC000897
UNSPSC 11
39121410
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Acceleration
30g
Number of shocks per direction
3
Result of temperature-rise test
Test passed
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Result of aging test
Test passed
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C