1028074 Phoenix Contact Terminal Blocks

Product Details

• Number of connections
  2
• Color
  black
• Nominal current IN
  24 A
• Finger protection
  guaranteed
• Result of tight fit on support
  Test passed
• Result of the test for mechanical stability of terminal points (5 x conductor connection)
  Test passed
• Result of temperature-rise test
  Test passed
• Result of thermal test
  Test passed
• Nominal cross section
  2.5 mm²
• Rated surge voltage
  6 kV
• Maximum power dissipation for nominal condition
  0.77 W
• Shock protection test specification
  DIN EN 50274 (VDE 0660-514):2002-11
• Result of power-frequency withstand voltage test
  Test passed
• Bending test turns
  135
• Setpoint
  1 N
• Flammability rating according to UL 94
  V0
• Result of surge voltage test
  Test passed
• Result of flexion and pull-out test
  Test passed
• Result of voltage-drop test
  Test passed
• Short-time current
  0.48 kA
Insulating material group
I
Nominal voltage UN
450 V
Tensile test result
Test passed
Insulating material
PA
Overvoltage category
III
Open side panel
No
Power frequency withstand voltage setpoint
1.89 kV
Bending test conductor cross section/weight
0.14 mm² / 0.2 kg
Note
When aligning several blocks, the foot elements should be placed in a way that maximum 5 blocks are free-hanging in between. Flange elements should be placed after every 9 blocks.
Conductor cross section short circuit testing
4 mm²
Ageing test for screwless modular terminal block temperature cycles
192
ASD level
6.12 (m/s2)2/Hz
Shock test result
Test passed
Number of shocks per direction
3
Width
5.2 mm
Connection in acc. with standard
IEC 60998-2-2
Conductor cross section flexible min.
0.14 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
2.5 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 5.0
27141120
ETIM 3.0
EC000897
UNSPSC 12.01
39121410
UNSPSC 21.0
39121410
Number of levels
1
Internal cylindrical gage
A3
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 4.1
27141121
ECLASS 7.0
27141120
UNSPSC 6.01
30211811
UNSPSC 19.0
39121410
Potentials
1
Degree of pollution
3
Maximum load current
27 A
Back of the hand protection
guaranteed
Bending test rotation speed
10 rpm
Tight fit on carrier
NS 35
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Conductor cross section AWG max.
12
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.34 mm²
ECLASS 10.0.1
27141120
ECLASS 5.1
27141120
ETIM 6.0
EC000897
UNSPSC 7.0901
39121410
UNSPSC 20.0
39121410
Short circuit stability result
Test passed
Result of aging test
Test passed
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Conductor cross section solid min.
0.34 mm²
Conductor cross section flexible max.
2.5 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.34 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Oscillation, broadband noise test result
Test passed
Shock form
Half-sine
Conductor cross section AWG min.
26
Max. AWG conductor cross section, flexible
12
Connection cross sections directly pluggable
0.34 mm² 4 mm² 24 12
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 4.0
27141121
ECLASS 9.0
27141120
ETIM 7.0
EC000897
UNSPSC 13.2
39121410
Acceleration
30g
ECLASS 11.0
27141120
ECLASS 6.0
27141100
ETIM 4.0
EC000897
UNSPSC 18.0
39121410
UNSPSC 11
39121410
Test spectrum
Service life test category 2, bogie-mounted
Test directions
X-, Y- and Z-axis (pos. and neg.)
Height
21.7 mm
Conductor cross section solid max.
4 mm²
Min. AWG conductor cross section, flexible
26
Conductor cross section flexible, with ferrule with plastic sleeve max.
2.5 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
Test duration per axis
5 h
Shock duration
18 ms
Surface flammability NFPA 130 (ASTM E 162)
passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Stripping length
8 mm ... 10 mm
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Connection method
Push-in connection
Length
28.6 mm
Static insulating material application in cold
-60 °C
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3