1027467 Phoenix Contact Electrical Wires & Cables

1027467 Product Details

• Degree of protection
  IP65
• Coding
  S power
• Overvoltage category
  III
• Insertion/withdrawal cycles
  ≥ 100
• Material of grip body
  Zinc die-cast, nickel-plated
• Standards/specifications
  M12 connector IEC 61076-2-111
• Ambient temperature (operation)
  -40 °C ... 85 °C (Plug / socket)
• Number of positions
  4
• Status display
  No
• Connection method
  Crimp connection
• Torque
  Pressure nut with coupling sleeve
• ECLASS 9.0
  27440102
• Length
  58 mm
• Rated voltage
  690 V AC
• Insulation resistance
  ≥ 100 MΩ
• Conductor cross section
  1.5 mm² ... 2.5 mm² (flexible)
• Contact carrier material
  PA
• ECLASS 10.0.1
  27440102
• Diameter housing
  21.5 mm
• Note
  NOTE: Observe the permissible bending radii when laying conductors, since the degree of protection may be put in jeopardy if the bending forces are too high. Alleviate mechanical loads upstream of the connector, e.g. by using cable ties.
Standards/regulations
M12 connector IEC 61076-2-111
Degree of pollution
3
Wire diameter incl. insulation
≤ 3.2 mm
Material, knurls
Zinc die-cast, nickel-plated
ETIM 6.0
EC002062
External cable diameter
6.5 mm ... 11 mm
Rated current at 40°C
12 A (when using 1.5 mm² conductors)
Signal type/category
Power
Conductor cross section AWG
14 (flexible)
Flammability rating according to UL 94
V0
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 11.0
27440102

Product condition