1020177 Phoenix Contact Terminal Blocks

Product Details

• Color
  gray
• Degree of pollution
  3
• Nominal voltage UN
  500 V
• Back of the hand protection
  guaranteed
• Power frequency withstand voltage setpoint
  1.89 kV
• Result of tight fit on support
  Test passed
• Requirement temperature-rise test
  Increase in temperature ≤ 45 K
• Short circuit stability result
  Test passed
• Number of connections
  2
• Flammability rating according to UL 94
  V0
• Overvoltage category
  III
• Shock protection test specification
  DIN EN 50274 (VDE 0660-514):2002-11
• Result of flexion and pull-out test
  Test passed
• Bending test rotation speed
  10 rpm
• Result of voltage-drop test
  Test passed
• Setpoint
  5 N
• Potentials
  1
• Rated surge voltage
  6 kV
• Maximum load current
  20 A
• Result of surge voltage test
  Test passed
Finger protection
guaranteed
Bending test conductor cross section/weight
0.5 mm² / 0.3 kg
Result of temperature-rise test
Test passed
Nominal cross section
6 mm²
Insulating material group
I
Open side panel
No
Result of power-frequency withstand voltage test
Test passed
Bending test turns
135
Tight fit on carrier
NS 32/NS 35
Acceleration
5g
Number of levels
1
Insulating material
PA
Maximum power dissipation for nominal condition
1.31 W
Nominal current IN
20 A
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Tensile test result
Test passed
Result of thermal test
Test passed
Result of aging test
Test passed
ASD level
0.964 (m/s2)2/Hz
Ageing test for screwless modular terminal block temperature cycles
192
Test duration per axis
5 h
Number of shocks per direction
3
Static insulating material application in cold
-60 °C
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Length
74.1 mm
Connection
1 level
Conductor cross section AWG min.
20
Conductor cross section AWG max.
8
UNSPSC 19.0
39121410
Test spectrum
Service life test category 1, class B, body mounted
Shock form
Half-sine
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Test frequency
f1 = 5 Hz to f2 = 150 Hz
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Width
8.2 mm
Connection method
Push-in connection
Conductor cross section flexible max.
10 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
1 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
6 mm²
ECLASS 4.0
27141121
ETIM 2.0
EC000897
UNSPSC 11
39121410
Proof of thermal characteristics (needle flame) effective duration
30 s
Test directions
X-, Y- and Z-axis (pos. and neg.)
Shock duration
30 ms
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Conductor cross section solid min.
1 mm²
Min. AWG conductor cross section, flexible
20
Conductor cross section flexible, with ferrule without plastic sleeve max.
6 mm²
ECLASS 11.0
27141126
ECLASS 5.0
27141100
ECLASS 5.1
27141100
UNSPSC 7.0901
39121410
UNSPSC 12.01
39121410
Oscillation, broadband noise test result
Test passed
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Height
43.8 mm
Height NS 35/15
51.2 mm
Conductor cross section solid max.
10 mm²
Conductor cross section flexible min.
0.5 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Internal cylindrical gage
A5
ECLASS 4.1
27141121
ETIM 3.0
EC000897
ETIM 4.0
EC000902
UNSPSC 21.0
39121410
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Shock test result
Test passed
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Height NS 35/7,5
43.7 mm
Connection in acc. with standard
IEC 60947-7-1
Max. AWG conductor cross section, flexible
10
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
2.5 mm² When using TWIN ferrules, we recommend a minimum ferrule length of 13 mm.
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 6.0
27141100
ECLASS 9.0
27141126
ETIM 7.0
EC000902
UNSPSC 13.2
39121410
UNSPSC 20.0
39121410
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Stripping length
10 mm ... 12 mm
Conductor cross section flexible, with ferrule without plastic sleeve min.
1 mm²
Connection cross sections directly pluggable
1 mm² 10 mm²
ECLASS 10.0.1
27141126
ECLASS 7.0
27141126
ETIM 6.0
EC000902
UNSPSC 6.01
30211811
UNSPSC 18.0
39121410