1009831 Phoenix Contact Electrical Safety Devices

1009831 Product Details

• Height
  112.2 mm
• Max. permissible relative humidity (operation)
  75 % (on average, 85% infrequently, non-condensing)
• Designation
  Air clearances and creepage distances between the power circuits
• Inrush current
  min. 10 mA
• Input voltage range "1" signal
  20.4 V DC ... 26.4 V DC
• Concurrence
  ∞
• Sq. Total current
  72 A2 (observe derating)
• Output fuse
  10 A gL/gG
• Typical pickup time at US
  200 ms (when controlled via A1)
• Mounting type
  DIN rail mounting
• Nominal operating mode
  100% operating factor
• Assembly instructions
  See derating curve
• Connection method
  Screw connection
• Screw thread
  M3
• Safety Integrity Level (SIL)
  3
• Rated surge voltage/insulation
  Safe isolation, reinforced insulation 6 kV between input circuit and enabling current path (13/14) and enabling current path (23/24)Basic insulation 4 kV between all current paths and housing
• Shock
  15g
• ECLASS 10.0.1
  27371819
• Ambient temperature (operation)
  -20 °C ... 55 °C (observe derating)
• Rated control circuit supply voltage US
  24 V DC -15 % / +10 % (provide external protection)
Protective circuit
Serial protection against polarity reversal Suppressor diode
Current consumption
typ. 10 mA (Typically with US at Y1)
Contact material
AgSnO2
Switching capacity
min. 100 mW
Maximum inrush current
500 mA (Δt = 1 ms at Us)
Typical response time at US
200 ms (automatic start)
Relay type
Electromechanical relay with force-guided contacts in accordance with IEC/EN 61810-3
Degree of protection
IP20
Operating voltage display
1 x green LED
Torque
0.5 Nm ... 0.6 Nm
Safety Integrity Level Claim Limit (SIL CL)
3
Vibration (operation)
10 Hz ... 150 Hz, 2g
ECLASS 9.0
27371819
Width
22.5 mm
Max. permissible humidity (storage/transport)
75 % (on average, 85% infrequently, non-condensing)
Rated control supply current IS
typ. 75 mA
Description of the input
non-safety-related
Max. permissible overall conductor resistance
50 Ω
Output name
Enabling current path
Switching voltage
min. 10 V AC/DC
Mechanical service life
10x 106 cycles
Typical release time at US
25 ms (when actuation is via the sensor circuit)
Min. degree of protection of inst. location
IP54
Housing color
yellow
pluggable
Yes
Category
4 (5 A DC13; 5 A AC15; 8760 switching cycles/year)
Conformance
CE-compliant
ECLASS 11.0
27371819
ETIM 6.0
EC001449
Depth
114.5 mm
Maximum altitude
≤ 2000 m (Above sea level)
Input name
Start circuit
Protective circuit/component
Suppressor diode
Output description
PNP
Switching frequency
max. 0.5 Hz
Voltage
approx. 23.9 V DC (Us - 0.1 V)
Restart time
< 1 s (Boot time)
Mounting position
vertical or horizontal
Status display
4 x green LEDs
Conductor cross section flexible
0.2 mm² ... 2.5 mm²
Stripping length
7 mm
Performance level (PL)
e
Rated insulation voltage
250 V
Degree of pollution
2
Overvoltage category
III
REACh SVHC
Lead 7439-92-1
Utilization restriction
EMC: class A product, see manufacturer's declaration in the download area
Ambient temperature (storage/transport)
-40 °C ... 70 °C
Power consumption at US
typ. 1.8 W
Filter time
No darkness test pulses / low test pulses permitted. No brightness test pulses / high test pulses permitted.
Number of inputs
3
Number of outputs
1
Contact type
2 enabling current paths
Limiting continuous current
6 A
Switching capacity according to IEC 60947-5-1
5 A (24 V (DC13))
Current
max. 100 mA
Recovery time
< 500 ms
Net weight
169.38 g
Housing material
PBT
Conductor cross section solid
0.2 mm² ... 2.5 mm²
Conductor cross-section AWG
24 ... 12
Stop category
0
Standards/regulations
DIN EN 50178
China RoHS
Environmentally Friendly Use Period = 50 years
ETIM 7.0
EC001449

Product condition