OMT600-R201-UEP-IO-V1-L Pepperl + Fuchs Electronic Components

Product Details

• Degree of protection
  IP67 / IP69 / IP69K
• Mass
  approx. 47 g
• Optical face
  PMMA
• Housing depth
  41.7 mm
• Connection
  4-pin, M12 x 1 connector, 90° rotatable
• Housing
  PC (Polycarbonate)
• Housing width
  15 mm
• Ambient temperature
  10 ... 50 °C (50 ... 122 °F)
• Housing height
  61.7 mm
• FDA approval
  IEC 60825-1:2014 Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007
• Repeat accuracy
  < 1 %
• UL approval
  E87056 , cULus Listed , class 2 power supply , type rating 1
• Storage temperature
  -40 ... 70 °C (-40 ... 158 °F)
• Load resistor
  > 1 kΩ voltage output ; ≤ 470 Ω current output
• Communication interface
  IEC 61131-9
• Voltage drop
  ≤ 1.5 V DC
• Output type
  1 voltage output: 0 ... 10 V
• CCC approval
  CCC approval / marking not required for products rated ≤36 V
• Linearity error
  0.75 %
• Warm up time
  5 min
Temperature drift
0.05 %/K
Laser safety
EN 60825-1:2014
Product standard
EN 60947-5-2
Response time
2 ms
Recovery time
2 ms
Usage category
DC-12 and DC-13
Switching current
max. 100 mA , resistive load
Switching voltage
max. 30 V DC
Switching type
The default setting is: C/Q - Pin4: NPN normally open, PNP normally closed, IO-Link, U—Pin2: analog output 0 ... 10 V
Compatible master port type
A
Min. cycle time
3 ms
SIO mode support
yes
Signal output
1 push-pull output , 1 analog output , short-circuit-proof, reverse polarity protection, surge-proof
Device ID
0x111919 (1120537)
Transfer rate
COM2 (38.4 kBit/s)
Process data width
Process data input 4 byte, Process data output 2 bits
Control elements
Teach-In key
Device profile
Identification and diagnosis, Smart Sensor type 0/type 3.3
Interface type
IO-Link ( via C/Q = pin 4 )
IO-Link revision
1.1
Protection class
III
Function indicator
LED yellow: constantly on - switch output active, constantly off - switch output inactive
Ripple
max. 10 %
No-load supply current
< 18 mA at 24 V supply voltage
Operating voltage
18 ... 30 V DC
Operation indicator
LED green: constantly on - power on, flashing (4Hz) - short circuit, flashing with short break (1 Hz) - IO-Link mode
Diagnostic Coverage (DC)
0 %
Opening angle
approx. 0.3 °
MTTFd
470 a
Resolution
0.1 mm
Mission Time (TM)
20 a
Ambient light limit
EN 60947-5-2 : 15000 Lux
Repetition rate
approx. 2.4 kHz
max. pulse energy
< 40 nJ
Diameter of the light spot
approx. 3 mm at a distance of 600 mm
Beam divergence
> 5 mrad, d63 < 2,8 mm in the range of 350 mm ... 800 mm
Pulse length
5.5 µs
Angle deviation
max. +/- 1.5 °
Measurement range
100 ... 600 mm
Laser class
1
Light type
modulated visible red light
Note
LASER LIGHT , DO NOT STARE INTO BEAM
Wave length
680 nm
Reference target
standard white, 100 mm x 100 mm
Light source
laser diode

Related documents OMT600-R201-UEP-IO-V1-L Specs