OBR7500-R100-2EP1-IO Pepperl + Fuchs Electronic Components

Product Details

• Polarization filter
  yes
• Housing width
  11 mm
• LED risk group labelling
  exempt group
• Diameter of the light spot
  approx. 65 mm at a distance of 1 m
• Mass
  approx. 36 g
• Light type
  modulated visible red light
• Housing
  PC (Polycarbonate)
• Cable length
  2 m
• Optical face
  PMMA
• Connection
  2 m fixed cable
• Degree of protection
  IP67 / IP69 / IP69K
• Housing depth
  21.5 mm
• EAC conformity
  TR CU 020/2011
• Ambient temperature
  -40 ... 60 °C (-40 ... 140 °F) , fixed cable, -25 ... 60 °C (-13 ... 140 °F) , movable cable not appropriate for conveyor chains
• UL approval
  E87056 , cULus Listed , class 2 power supply , type rating 1
• Storage temperature
  -40 ... 70 °C (-40 ... 158 °F)
• Housing height
  37.1 mm
• Switching frequency
  1000 Hz
• Product standard
  EN 60947-5-2
• Usage category
  DC-12 and DC-13
Communication interface
IEC 61131-9
Voltage drop
≤ 1.5 V DC
Response time
0.5 ms
Switching current
max. 100 mA , resistive load
Switching voltage
max. 30 V DC
Signal output
2 push-pull (4 in 1) outputs, short-circuit protected, reverse polarity protected, overvoltage protected
Switching type
The switching type of the sensor is adjustable. The default setting is: C/Q - BK: NPN normally closed / light-on, PNP normally open / dark-on, IO-Link, /Q - WH: NPN normally open / dark-on, PNP normally closed / light-on
Process data width
Process data input 2 Bit, Process data output 2 Bit
Compatible master port type
A
Min. cycle time
2.3 ms
SIO mode support
yes
IO-Link revision
1.1
Device ID
0x110211 (1114641)
Transfer rate
COM2 (38.4 kBit/s)
No-load supply current
< 25 mA at 24 V supply voltage
Ripple
max. 10 %
Interface type
IO-Link ( via C/Q = pin 4 )
Protection class
III
Control elements
Light-on/dark-on changeover switch
Parameterization indicator
IO link communication: green LED goes out briefly (1 Hz)
Operating voltage
10 ... 30 V DC
MTTFd
724 a
Operation indicator
LED green: constantly on - power on, flashing (4Hz) - short circuit, flashing with short break (1 Hz) - IO-Link mode
Function indicator
Yellow LED: Permanently lit - light path clear, Permanently off - object detected, Flashing (4 Hz) - insufficient operating reserve
Mission Time (TM)
20 a
Diagnostic Coverage (DC)
0 %
Ambient light limit
EN 60947-5-2
Opening angle
3.7 °
Reflector distance
0.03 ... 7.5 m
Threshold detection range
10 m
Reference target
H85-2 reflector
Light source
LED
Effective detection range
0 ... 7.5 m

Related documents OBR7500-R100-2EP1-IO Specs