OBR7500-R100-2EP1-IO-V31 Pepperl + Fuchs Electronic Components
Part#:OBR7500-R100-2EP1-IO-V31
Manufacturer:Pepperl + Fuchs
Product Lifecycle:Active
Get a quick Quote!
Retroreflective sensor with polarization filter, Miniature design with versatile mounting options, Extended temperature range-40 °C ... 60 °C, High degree of protection IP69K, IO-Link interce for service and process data
Check out the OBR7500-R100-2EP1-IO-V31 Pepperl + Fuchs price in the box on the right side or send a quick quote.
Product Details
- Mass approx. 10 g
- Degree of protection IP67 / IP69 / IP69K
- Optical face PMMA
- Ambient temperature -40 ... 60 °C (-40 ... 140 °F),
- Connection M8 x 1 connector, 4-pin
- Housing PC (Polycarbonate)
- EAC conformity TR CU 020/2011
- Housing width 11 mm
- Product standard EN 60947-5-2
- Housing depth 21.5 mm
- Communication interface IEC 61131-9
- UL approval E87056 , cULus Listed , class 2 power supply , type rating 1
- Storage temperature -40 ... 70 °C (-40 ... 158 °F)
- Housing height 44.5 mm
- Response time 0.5 ms
- Switching frequency 1000 Hz
- Switching current max. 100 mA , resistive load
- Usage category DC-12 and DC-13
- Signal output 2 push-pull (4 in 1) outputs, short-circuit protected, reverse polarity protected, overvoltage protected
- Switching voltage max. 30 V DC
- Transfer rate COM2 (38.4 kBit/s)
- SIO mode support yes
- Voltage drop ≤ 1.5 V DC
- Process data width Process data input 2 Bit, Process data output 2 Bit
- Compatible master port type A
- Switching type The switching type of the sensor is adjustable. The default setting is: C/Q - Pin4: NPN normally closed / light-on, PNP normally open / dark-on, IO-Link, /Q - Pin2: NPN normally open / dark-on, PNP normally closed / light-on
- Min. cycle time 2.3 ms
- IO-Link revision 1.1
- Device ID 0x110211 (1114641)
- Protection class III
- Ripple max. 10 %
- Mission Time (TM) 20 a
- Interface type IO-Link ( via C/Q = pin 4 )
- Diagnostic Coverage (DC) 0 %
- No-load supply current < 25 mA at 24 V supply voltage
- MTTFd 724 a
- Parameterization indicator IO link communication: green LED goes out briefly (1 Hz)
- Operation indicator LED green: constantly on - power on, flashing (4Hz) - short circuit, flashing with short break (1 Hz) - IO-Link mode
- Control elements Light-on/dark-on changeover switch
- Operating voltage 10 ... 30 V DC
- Opening angle 3.7 °
- Function indicator Yellow LED: Permanently lit - light path clear, Permanently off - object detected, Flashing (4 Hz) - insufficient operating reserve
- Ambient light limit EN 60947-5-2
- Reflector distance 0.03 ... 7.5 m
- Reference target H85-2 reflector
- Light type modulated visible red light
- LED risk group labelling exempt group
- Diameter of the light spot approx. 65 mm at a distance of 1 m
- Threshold detection range 10 m
- Effective detection range 0 ... 7.5 m
- Light source LED
- Polarization filter yes
Product condition
ORIGINAL PACKAGING
SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging
Related documents OBR7500-R100-2EP1-IO-V31 Specs
1-year warranty
Get a quick Quote!
Request a quote, and we will send you price and availability within minutes.
Select Qty:
Average response time: 11 minutes
By purchasing this item, you agree to the Terms & Conditions
Quotebeam is NOT an authorized distributor of Pepperl + Fuchs
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Pepperl + Fuchs Disclaimer:
The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Pepperl + Fuchs Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Pepperl + Fuchs, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Relevant products
Do you have questions?
We’re here for you ✨
We are a proud member of:
