OBR25M-R201-2EP-IO-0,3M-V31-L Pepperl + Fuchs Electronic Components
Part#:OBR25M-R201-2EP-IO-0,3M-V31-L
Manufacturer:Pepperl + Fuchs
Product Lifecycle:Active
Get a quick Quote!
Laser retroreflective sensor, Medium design with versatile mounting options, DuraBeam Laser Sensors - durable and employable like an LED, Extended temperature range-40 °C ... 60 °C, High degree of protection IP69K, IO-Link interce for service and process
Check out the OBR25M-R201-2EP-IO-0,3M-V31-L Pepperl + Fuchs price in the box on the right side or send a quick quote.
Product Details
- Cable length 0.3 m
- Mass approx. 51 g
- Optical face PMMA
- Housing PC (Polycarbonate)
- Connection fixed cable 300 mm with M8 x 1 male connector; 4-pin
- Housing depth 41.7 mm
- Degree of protection IP67 / IP69 / IP69K
- Housing height 61.7 mm
- Storage temperature -40 ... 70 °C (-40 ... 158 °F)
- Housing width 15 mm
- Ambient temperature -40 ... 60 °C (-40 ... 140 °F) , fixed cable, -20 ... 60 °C (-4 ... 140 °F) , movable cable not appropriate for conveyor chains
- FDA approval IEC 60825-1:2007 Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007
- CCC approval CCC approval / marking not required for products rated ≤36 V
- UL approval E87056 , cULus Listed , class 2 power supply , type rating 1
- Switching frequency 2000 Hz
- Product standard EN 60947-5-2
- Laser safety EN 60825-1:2014
- Communication interface IEC 61131-9
- Usage category DC-12 and DC-13
- Voltage drop ≤ 1.5 V DC
- Switching current max. 100 mA , resistive load
- Response time 250 µs
- Signal output 2 push-pull (4 in 1) outputs, short-circuit protected, reverse polarity protected, overvoltage protected
- Switching type The switching type of the sensor is adjustable. The default setting is: C/Q - Pin4: NPN normally open / dark-on, PNP normally closed / light-on, IO-Link, /Q - Pin2: NPN normally closed / light-on, PNP normally open / dark-on
- Switching voltage max. 30 V DC
- Compatible master port type A
- Min. cycle time 2.3 ms
- Process data width Process data input 2 Bit, Process data output 2 Bit
- SIO mode support yes
- Transfer rate COM2 (38.4 kBit/s)
- Device ID 0x111212 (1118738)
- Device profile Identification and diagnosis, Smart Sensor type 2.4
- Protection class III
- IO-Link revision 1.1
- Interface type IO-Link ( via C/Q = pin 4 )
- No-load supply current < 15 mA at 24 V Operating voltage
- Operating voltage 10 ... 30 V DC
- Ripple max. 10 %
- Operation indicator LED green: constantly on - power on, flashing (4Hz) - short circuit, flashing with short break (1 Hz) - IO-Link mode
- Mission Time (TM) 20 a
- Function indicator Yellow LED: Permanently lit - light path clear, Permanently off - object detected, Flashing (4 Hz) - insufficient operating reserve
- Control elements Light-on/dark-on changeover switch
- Diagnostic Coverage (DC) 0 %
- MTTFd 672 a
- Ambient light limit EN 60947-5-2 : 60000 Lux
- Diameter of the light spot approx. 50 mm at a distance of 25 m
- Opening angle approx. 0.1 °
- Wave length 680 nm
- Repetition rate max. 17.6 kHz
- Pulse length 1.6 µs
- max. pulse energy 9.6 nJ
- Beam divergence > 5 mrad d63 < 2 mm in the range of 250 mm ... 750 mm
- Effective detection range 0 ... 25 m
- Threshold detection range 33 m
- Light type modulated visible red light
- Polarization filter yes
- Reflector distance 0.5 ... 25 m
- Note LASER LIGHT , DO NOT STARE INTO BEAM
- Reference target H85-2 reflector
- Laser class 1
- Light source laser diode
Product condition
ORIGINAL PACKAGING
SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging
Related documents OBR25M-R201-2EP-IO-0,3M-V31-L Specs
1-year warranty
Get a quick Quote!
Request a quote, and we will send you price and availability within minutes.
Select Qty:
Average response time: 11 minutes
By purchasing this item, you agree to the Terms & Conditions
Quotebeam is NOT an authorized distributor of Pepperl + Fuchs
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Pepperl + Fuchs Disclaimer:
The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Pepperl + Fuchs Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Pepperl + Fuchs, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Relevant products
Do you have questions?
We’re here for you ✨
We are a proud member of:
