OBR2000-R3-E3-P-L Pepperl + Fuchs Electronic Components
Part#:OBR2000-R3-E3-P-L
Manufacturer:Pepperl + Fuchs
Product Lifecycle:Active
Get a quick Quote!
Retroreflective sensor, Laser retroreflective sensor, ultra-small design with M3 mounting, polarization filter, 2000 mm detection range, light on, PNP output, 2 m fixed cable, Ultra-small housing design, DuraBeam Laser Sensors - durable and employable lik
Check out the OBR2000-R3-E3-P-L Pepperl + Fuchs price in the box on the right side or send a quick quote.
Product Details
- Cable length 2 m
- Housing PC/ABS and TPU
- Degree of protection IP67
- Cable PUR
- Mass approx. 20 g
- Connection 2 m fixed cable
- Housing height 26 mm
- Housing depth 13.8 mm
- Housing width 7.5 mm
- CCC approval CCC approval / marking not required for products rated ≤36 V
- Ambient temperature -20 ... 60 °C (-4 ... 140 °F)
- FDA approval IEC 60825-1:2007 Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007
- Storage temperature -30 ... 70 °C (-22 ... 158 °F)
- UL approval E87056 , cULus Recognized, Class 2 Power Source
- EAC conformity TR CU 020/2011
- Laser safety EN 60825-1:2007
- Product standard EN 60947-5-2
- Switching frequency approx. 2 kHz
- Response time 250 µs
- Voltage drop ≤ 1.5 V DC
- Signal output 1 PNP output, short-circuit protected, reverse polarity protected, open collector
- Switching current max. 50 mA , resistive load
- Switching voltage max. 30 V DC
- Operating voltage 12 ... 24 V
- Switching type NC contact / light on
- No-load supply current < 10 mA
- Protection class III
- Operation indicator LED green, statically lit Power on , short-circuit : LED green flashing (approx. 4 Hz)
- Function indicator LED yellow: lights up when receiving the light beam ; flashes when falling short of the stability control; OFF when light beam is interrupted
- Diagnostic Coverage (DC) 0 %
- Ambient light limit EN 60947-5-2 : 30000 Lux
- Diameter of the light spot approx. 35 mm at a distance of 2000 mm
- Mission Time (TM) 20 a
- MTTFd 800 a
- Optical face frontal
- Opening angle approx. 0.5 °
- Wave length 680 nm
- max. pulse energy 8 nJ
- Repetition rate approx. 16.6 kHz
- Beam divergence > 5 mrad
- Pulse length approx. 3 µs
- Light source laser diode
- Note LASER LIGHT , DO NOT STARE INTO BEAM
- Laser class 1
- Reference target H40 reflector
- Light type modulated visible red light , 680 nm
- Reflector distance 40 ... 2000 mm
- Threshold detection range 2.3 m
- Effective detection range 0 ... 2 m
- Polarization filter yes
Product condition
ORIGINAL PACKAGING
SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging
Related documents OBR2000-R3-E3-P-L Specs
1-year warranty
Get a quick Quote!
Request a quote, and we will send you price and availability within minutes.
Select Qty:
Average response time: 11 minutes
By purchasing this item, you agree to the Terms & Conditions
Quotebeam is NOT an authorized distributor of Pepperl + Fuchs
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Pepperl + Fuchs Disclaimer:
The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Pepperl + Fuchs Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Pepperl + Fuchs, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Relevant products
Do you have questions?
We’re here for you ✨
We are a proud member of:
