NJ50-FP-N-P4 Pepperl + Fuchs Electronic Components
Part#:NJ50-FP-N-P4
Manufacturer:Pepperl + Fuchs
Product Lifecycle:Active
Get a quick Quote!
Inductive sensor, Switching function: Normally closed (NC), Output type: NAMUR, Installation: non-flush, Output type: 2-wire, Construction type: Rectangular, Series: Rectangular type, Type of voltage: DC, Equipment protection level Ga: IECEx PTB 11.0021X,
Check out the NJ50-FP-N-P4 Pepperl + Fuchs price in the box on the right side or send a quick quote.
Product Details
- Use in the hazardous area see instruction manuals
- Note Tightening torque: 1.8 Nm (housing)
- Sensing face PBT
- Degree of protection IP67
- Housing material PBT/metal
- Minimum core cross-section without wire end ferrule 0.5 mm2, with connector sleeves 0.34 mm2
- Ambient temperature -25 ... 70 °C (-13 ... 158 °F)
- Core cross section up to 2.5 mm2
- Information for connection A maximum of two conductors with the same core cross section may be mounted on one terminal connection!, tightening torque 1.2 Nm + 10 %
- Maximum core cross-section without wire end ferrule 2.5 mm2, with connector sleeves 1.5 mm2
- NEPSI certificate GYJ16.1394X
- Connection type screw terminals
- Control drawing 116-0451
- Hazardous Location E501628
- Equipment protection level Ga IECEx PTB 11.0021X
- Ordinary Location E87056
- Measuring plate detected ≤ 1 mA
- Equipment protection level Da IECEx PTB 11.0021X
- EAC conformity TR CU 012/2011
- Equipment protection level Gb IECEx PTB 11.0021X
- Standards EN 60947-5-2:2007, EN 60947-5-2/A1:2012, IEC 60947-5-2:2007, IEC 60947-5-2 AMD 1:2012
- Measuring plate not detected min. 3 mA
- NAMUR EN 60947-5-6:2000, IEC 60947-5-6:1999
- Switching frequency 0 ... 100 Hz
- Reduction factor r304 0.85
- Reduction factor rAl 0.4
- Nominal voltage 8.2 V (Riapprox. 1 kΩ)
- Output type NAMUR
- Rated operating distance 50 mm
- Reduction factor rCu 0.3
- Switching function Normally closed (NC)
- Installation non-flush
- Assured operating distance 0 ... 40.5 mm
Product condition
ORIGINAL PACKAGING
SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging
Related documents NJ50-FP-N-P4 Specs
1-year warranty
Get a quick Quote!
Request a quote, and we will send you price and availability within minutes.
Select Qty:
Average response time: 11 minutes
By purchasing this item, you agree to the Terms & Conditions
Quotebeam is NOT an authorized distributor of Pepperl + Fuchs
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Pepperl + Fuchs Disclaimer:
The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Pepperl + Fuchs Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Pepperl + Fuchs, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Relevant products
Do you have questions?
We’re here for you ✨
We are a proud member of:
