NJ50-FP-N-P1 Pepperl + Fuchs Electronic Components
Part#:NJ50-FP-N-P1
Manufacturer:Pepperl + Fuchs
Product Lifecycle:Active
Get a quick Quote!
Inductive sensor, Switching function: Normally closed (NC), Output type: NAMUR, Installation: non-flush, Output type: 2-wire, Construction type: Rectangular, Series: Rectangular type, Type of voltage: DC, Equipment protection level Ga: IECEx PTB 11.0021X,
Check out the NJ50-FP-N-P1 Pepperl + Fuchs price in the box on the right side or send a quick quote.
Product Details
- Use in the hazardous area see instruction manuals
- Note Tightening torque: 1.8 Nm (housing)
- Degree of protection IP67
- Housing material PBT
- Minimum core cross-section without wire end ferrule 0.5 mm2, with connector sleeves 0.34 mm2
- Maximum core cross-section without wire end ferrule 2.5 mm2, with connector sleeves 1.5 mm2
- Sensing face PBT
- Connection (system side) screw terminals , M20 x 1.5 cable gland , usable thread length 10 mm , screw-in depth max. 10 mm
- Core cross section up to 2.5 mm2, stripped insulation length: 7 mm
- Information for connection A maximum of two conductors with the same core cross section may be mounted on one terminal connection!, tightening torque 1.2 Nm + 10 %
- Connection type screw terminals
- Ambient temperature -25 ... 70 °C (-13 ... 158 °F)
- NEPSI certificate GYJ16.1394X
- ANZEx 19.3001X
- Hazardous Location E501628
- UL approval cULus Listed, General Purpose
- Ordinary Location E87056
- Equipment protection level Mb IECEx PTB 11.0021X
- Control drawing 116-0451
- Equipment protection level Gb IECEx PTB 11.0021X
- EAC conformity TR CU 012/2011
- Equipment protection level Da IECEx PTB 11.0021X
- Equipment protection level Ga IECEx PTB 11.0021X
- Standards EN 60947-5-2:2007, EN 60947-5-2/A1:2012, IEC 60947-5-2:2007, IEC 60947-5-2 AMD 1:2012
- NAMUR EN 60947-5-6:2000, IEC 60947-5-6:1999
- Mission Time (TM) 20 a
- MTTFd 11400 a
- Diagnostic Coverage (DC) 0 %
- Measuring plate not detected ≥ 3 mA
- Measuring plate detected ≤ 1 mA
- Switching frequency 0 ... 100 Hz
- Nominal voltage 8.2 V (Riapprox. 1 kΩ)
- Installation non-flush
- Rated operating distance 50 mm
- Reduction factor rAl 0.4
- Assured operating distance 0 ... 40.5 mm
- Output type NAMUR
- Switching function Normally closed (NC)
- Reduction factor r304 0.85
- Reduction factor rCu 0.3
Product condition
ORIGINAL PACKAGING
SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging
Related documents NJ50-FP-N-P1 Specs
1-year warranty
Get a quick Quote!
Request a quote, and we will send you price and availability within minutes.
Select Qty:
Average response time: 11 minutes
By purchasing this item, you agree to the Terms & Conditions
Quotebeam is NOT an authorized distributor of Pepperl + Fuchs
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Pepperl + Fuchs Disclaimer:
The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Pepperl + Fuchs Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Pepperl + Fuchs, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Relevant products
Do you have questions?
We’re here for you ✨