KFD2-ER-1.6 Pepperl + Fuchs Electronic Components
Part#:KFD2-ER-1.6
Manufacturer:Pepperl + Fuchs
Product Lifecycle:Active
Get a quick Quote!
Conductive Switch Amplifier, 1-channel signal conditioner, 24 V DC supply (Power Rail), Level sensing input, Adjustable range 5 kΩ ... 150 kΩ, Relay contact output, Minimum/maximum control, Housing width: 20 mm, Number of channels: 1-channel, Conductivity
Check out the KFD2-ER-1.6 Pepperl + Fuchs price in the box on the right side or send a quick quote.
Product Details
- Supplementary information Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.
- Ambient temperature -20 ... 60 °C (-4 ... 140 °F), extended ambient temperature range up to 70 °C (158 °F), refer to manual for necessary mounting conditions
- Dimensions 20 x 107 x 115 mm (0.8 x 4.2 x 4.5 inch) (W x H x D) , housing type B1
- Mounting on 35 mm DIN mounting rail acc. to EN 60715:2001
- Mass approx. 110 g
- Degree of protection IEC 60529:2001
- Electromagnetic compatibility NE 21:2006
- Input/power supply reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff
- Control elements DIP switch, potentiometer
- Output/power supply reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff
- Configuration via DIP switches : switch S1, Position I open circuit current: In the open circuit current principle, the relay becomes active when the limit is reached., Position II closed circuit current: In closed circuit current principle, the relay is activated when
- Directive 2014/35/EU EN 61010-1:2010
- Directive 2014/30/EU EN 61326-1:2013 (industrial locations)
- Labeling space for labeling at the front
- Input/Output reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff
- Energized/De-energized delay approx. 1 s / approx. 1 s
- Display elements LEDs
- Contact loading 253 V AC/2 A/cos φ > 0.7; 40 V DC/2 A resistive load
- Control input min./max. control system: terminals 1, 2, 3, on/off control system: terminals 1, 3
- Connection Power Rail or terminals 11+, 12-
- Open circuit voltage/short-circuit current approx. 10 V AC (approx. 1 Hz) / approx. 5 mA
- Output 1 changeover contact
- Rated voltage 20 ... 30 V DC
- Connection side field side
- Signal type Digital Input
- Response sensitivity 5 ... 150 kΩ , adjustable via potentiometer (20 turns)
Product condition
ORIGINAL PACKAGING
SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging
Related documents KFD2-ER-1.6 Specs
1-year warranty
Get a quick Quote!
Request a quote, and we will send you price and availability within minutes.
Select Qty:
Average response time: 11 minutes
By purchasing this item, you agree to the Terms & Conditions
Quotebeam is NOT an authorized distributor of Pepperl + Fuchs
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Pepperl + Fuchs Disclaimer:
The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Pepperl + Fuchs Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Pepperl + Fuchs, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Relevant products
Do you have questions?
We’re here for you ✨
We are a proud member of:
