7072-77301-5691000 Murr Elektronik Electronic Components

7072-77301-5691000 Product Details

• Cable length
  10 m
• Torsion speed
  35 cycles/min
• No. of torsion cycles
  max. 2 Mio. (25 °C)
• Product article number of manufacturer
  7072-77301-5691000
• Torsion stress
  ±180°/m
• Acceleration (C-track)
  max. 10 m/s²
• Bend radius (moving)
  10× outer Ø
• Travel speed (C-track)
  max. 3 m/s
• No. of bending cycles (C-track)
  max. 10 Mio. (25 °C)
• Test voltage
  2500 V AC
• Bend radius (fixed)
  5× outer Ø
• Temperature range (mobile)
  -25...+80 °C, (+90 °C at max. 10 000 operating hours)
• Temperature range (fixed)
  -40...+80 °C, (+90 °C at max. 10 000 operating hours)
• Current load capacity
  to DIN VDE 0298-4
• Nominal voltage
  300 V AC
• thermal resistance
  flame retardand UL 1581 Section 1090 (H), CSA FT2 / IEC 60332-2-2
• Outer-Ø (jacket)
  6.5 mm ±5%
• chemical resistance
  good resistance to oil, gasoline and chemicals (VDE 0472 Teil 803 Test B)
• Material property (jacket)
  CFC-, halogen-, cadmium-, silicone- and lead-free, matt, low-adhesion, machine easy to process, abrasion-resistant, hydrolysis and microbial resistant
• Shore hardness (jacket)
  90 ±5 A
Color (jacket)
black
Material (jacket)
PUR
Shield
no
Stranding combination
4 wires twisted
Color/numbering of wires
br, bk, bl, wh
Wire-Ø incl. isolation
1.85 mm ±5%
Shore hardness (wire isolation)
70 ±5 D
Material (wire isolation)
PP
Material property (wire isolation)
CFC-, halogen-, cadmium-, silicone- and lead-free
Construction (core)
42× 0.15 mm (multi-strand wire class 6)
Diameter (core)
4× 0.75 mm²
AWG
similar to AWG 18
Single wire Ø (core)
0.15 mm
Resistor (core)
max. 26 Ω/km (20 °C)
Material (wire)
Cu wire, bare
Cable weight [g/m]
62,7 g
Cable identification
569
Approval (cable)
cURus (AWM-Style 20549/10493); CE conform
Cable Type
3 (PUR)
Temperature range
-25...+85 °C, depending on cable quality
Material (contact surface)
Ni
Material (gasket)
Silicon
Pollution Degree
3
Mounting method
inserted, tightened
Standards
DIN EN 61076-2-101 (M12)
Material (contact)
Copper alloy
Locking material
Stainless steel 1.4305 (V2A/M12)
Locking of ports
Screw thread (M12×1 mm) recommended torque 0.6 Nm, self-securing, Snap-in connector (MDC)
Compression gland
M12 (SW14)
Housing
Amphenol AT06-4S
Additional suppressor
without components
Material
PUR (M12); PA (MDC)
Material group
IEC 60664-1, category I
Protection
IP68 (AT06-4S) - IP65, IP66K, IP68 (M12)
Rated surge voltage
2.5 kV
LED display
no
Operating current per contact
max. 4 A
No. of poles
4-pole
Operating voltage
6...230 V AC/DC
Coding
M12, A-coded
Form
77301

Product condition

Related documents 7072-77301-5691000 Specs